911007 (002501) Ariens Lawn Mower - Overview

This friction wheel, or disc, works in conjunction with a pulley system in your lawn equipment to propel your machine forward. It is a metal disc with a rubber ring around it, has an approximate inside diameter of 2.5 inches, and is commonly mounted onto the axle of your machine. When it is broken, you can visually identify cracks in or m...Read moreissing parts from the part, or excessive wear on the rubber ring. If you do not replace it, your equipment may struggle to move on slippery or uneven surfaces and lose traction. To remove the old friction wheel, start by turning off the engine and disconnecting the spark plug wire. Consult your user manual for instructions on accessing the wheel. You might need a wrench or socket to remove retaining bolts, screws, or clips. Keep in mind that the replacement part is sold individually since your machine may require more than one wheel, and they tend to wear out at the same time.

This 21-inch medium-lift mower blade is designed for dependable, all-around cutting performance on walk-behind lawn mowers. Manufactured from durable alloy steel, it provides balanced airflow for clean cutting and efficient clipping discharge across a wide range of grass conditions. Ideal for replacing a worn or dulled blade, it helps res...Read moretore consistent cut quality, smooth mower operation, and a well-finished lawn during regular maintenance.

This is a genuine replacement part sourced directly from the manufacturer. The side discharge cover is commonly found on Ariens lawnmowers. This part is made of high-quality plastic, and is used to cover the side discharge vent when side discharging is not desired. You may require a screwdriver and wrench when replacing this part. This item is sold individually.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This genuine OEM sourced part is specially designed for use with Ariens lawn and garden equipment. The purpose of this spring is to apply tension to the idle arm, unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the cor...Read morerect location and application of this hardware. Keep in mind this high-quality spring is made of durable metal and is sold individually.

The v-belt goes around the traction drive pulley and the idler. It is an authentic OEM sourced item which is specifically produced for use with Ariens lawn mowers. This item is available individually. When replacing this part a wrench may be needed. It will require replacing if it becomes broken or stretched.

This is a genuine manufacturer-approved carriage bolt, designed as a standard replacement part that fits a variety of products. It features a square section beneath the head, which fits into a matching square hole in the workpiece. This design prevents the bolt from turning while the nut is being tightened, ensuring a secure and stable fit. Please note that this item is sold individually and does not include the nut.

This authentic replacement part is designed for use with Ariens snowblowers. Ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time it will wear out ...Read moreand it may begin to fail eventually requiring a replacement. Keep in mind this high-quality component is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware.