9072-20 (238B) Milwaukee Wrench - Overview

This detent spring is an original part from the Milwaukee manufacturer. The metal item is made for use with several impact wrenches. The spring is fitted onto the detent pin, securing sockets in the anvil. The detent spring is sold individually. A screwdriver is helpful for making the installation.

This is a genuine manufacturer-sourced part which has been designed for use with many impact wrenches. The Milwaukee detent pin is powered by the anvil's detent spring, which secures the driver socket of the wrench. A screwdriver and a pair of pliers may be helpful for the repair. The detent pin is sold individually.

Genuine Milwaukee replacement part. This Brush is sold individually, most repair jobs will require Two (2) of this item. As pictured, this brush is ready to install and includes carbon brush, wire lead, and spring. Over time, brushes will wear down and eventually require replacement. Carbon motor brushes are one of the most commonly repl...Read moreaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This bearing is an authentic part produced by the original manufacturer. It is compatible with a variety of Milwaukee handheld power tools. Ball bearings reduce friction between metal parts. They allow parts such as axles and shafts to rotate freely and steadily. Ball bearings are high wear components and are commonly replaced. Sold separately.

This is an authentic manufacturer approved replacement part specially designed for use with compatible Milwaukee impact wrench. It allows user to secure different wrenches and keys. This part is made out of metal and is sold individually. An impact driver's anvil can wear on both sides from inside the drill housing where the hammer mec...Read morehanism strikes it or from the outside where it meets your bits. If this happens, you'll want to replace the anvil. Luckily, replacing the anvil is a relatively quick repair

This is a pivot pin designed for use in impact wrenches and drivers. Its purpose is to connect the hammer and the anvil, allowing the hammer to move back and forth and drive the bit into the material being worked on. The pivot pin measures approximately 0.5 inches in length and is sold individually as a genuine OEM part made of high-quali...Read morety metal. Because this is a high-wear component, the pivot pin can break or malfunction over time, necessitating replacement. If you notice that the assembly feels loose or wobbly, it is advisable to inspect the condition of this pin. If it is damaged or compromised in any way, it should be replaced. To replace this pin, you will need a punch and hammer to release the old pin, as well as a set of pliers to hold the detent pin in place when installing the new pivot pin.