8902 (Type 3) Porter Cable Router - Overview

This is a genuine replacement part sourced from the original manufacturer for use with routers. The special straight edge guide is used to guide the router along the material being cut. This straight edge guide is available as an individual replacement part, please see model diagram for associative parts.

It is a high-quality part that is supplied by the original manufacturer for Black and Decker and Porter Cable routers. The pin helps to engage the collet in the chuck. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. One durable metal pin is included. To ensure the correct applicati...Read moreon of this component, check the owner's manual and the diagrams of your model. You may need a screwdriver and pliers to remove the old pin and secure the new one. Note, the spring and the spindle lock retainer are both sold separately.

The rack attaches to the motor housing. This item is sold individually and is made of metal. It is a genuine OEM sourced part which is specially designed for use with routers made by Porter Cable and Black & Decker. A screwdriver may be needed during the replacement of this item. Over time this part may break and will need to be replaced.

It is an authentic part that is supplied by the original equipment manufacturer for Porter Cable and Black and Decker routers. This is an identical replacement for a missing or faulty screw that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this...Read more component. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This genuine ball bearing is designed to reduce friction and support smooth rotation within power tools, helping ensure consistent and efficient performance. Built to precise dimensions for a secure fit, it plays a key role in maintaining proper movement of internal components. This replacement is ideal if your tool is experiencing binding, noise, or uneven operation, helping restore reliable functionality.

This is an authentic OEM sourced item that is specially designed for use with Porter Cable and Black and Decker routers. Ball bearings are generally utilized to reduce the friction between rotating parts, over time it may wear out and begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams o...Read moref your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an Authentic Manufacturer Approved replacement part used on Routers. This part provides a firm grip for holding a bit in a tool. It is made out of Metal and is Sold Individually. This Collet is for using bits with 1/2" arbors only. Includes the 1/2" Collet and a Collet Nut. Due to prolonged, heavy use a Collet may need to be repl...Read moreaced eventually. To replace this Collet you would need to use a Wrench. • First you would need to remove the Collet Nut • Once the Nut is removed you can remove the old Collet • Place a new one in place • Tighten the Collet Nut back in place and your unit is ready to use 1/2" Bits

This is a Genuine Manufacturer Approved replacement part used on some Routers. This part provides the firm grip for holding a bit in a tool. This Collet is for using bits with 1/4" arbors. Due to prolonged, heavy use a collet may need to be replaced. Collet Nut is included in this Assembly.

A genuine item that is supplied directly from the original equipment manufacturer for use with Abu Garcia fishing reels. It is a specially designed screw which helps to secure the side plate, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable component is made of high-quality metal and is sold individually.