8901 - Overview

This is a genuine OEM sourced part that is specially designed for use with Ariens equipment. The wheel is utilized to support the unit while allowing for easy movement. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your mo...Read moredel for the correct location and application of this component. Keep in mind this high-quality wheel is made of durable plastic and is sold individually.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This manufacturer-sourced replacement screw is designed for use with Ariens snow blowers and throwers. As a standard hardware component, it has multiple potential applications depending on the model. Made of durable metal, this part is sold individually. A wrench is required to tighten or loosen the screw during installation or removal. For proper use and placement, please refer to your equipment’s diagrams.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is an authentic OEM sourced replacement part that has been sourced from the original manufacturer to be used with lawn tractors from Snapper and Simplicity. The metal bushing fits into the front wheel mounting bracket. This item is used to provide spacing between the caster and the bracket assembly. The caster busing is sold individually.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

Spacer 1.0 od x.640

This authentic component is supplied by the original equipment manufacturer. It is specially designed for use with Snapper lawn mowers. The blade is utilized to cut grass. Unfortunately, over time it may wear out, become dull or damaged eventually requiring a replacement. Make sure to refer to the owners manual of your model for the corre...Read morect installation of this part. To replace the blade you will need a wrench in order to remove and resecure the blade bolt.

This is an original replacement part manufactured for use with riding lawnmowers. The washer is commonly used to provide a wider surface area to disperse the pressure put on the blade by the bolt that is fastened to the spindle. This washer is available as an individual replacement part, please see model diagram for associative parts.

This is a manufacturer-approved carriage bolt designed for use with Ariens snow blowers and snow throwers. Made from durable metal, this standard hardware component is suitable for a variety of applications. The bolt features a square section beneath the rounded head, which fits securely into a matching square hole in the workpiece. This ...Read moredesign prevents the bolt from turning when the nut is tightened, ensuring a secure and stable fit. Sold individually, this bolt is a reliable replacement part. For proper installation and compatibility, please refer to your equipment’s diagrams or user manual.