EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

867736433 Kenmore Furnace - Overview

Sections of the 867736433

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WP308544
Screw
PartSelect #: PS11740698
Manufacturer #: WP308544
$7.47
  Special Order
SWITCH- TE – Part Number: 40046601
SWITCH- TE
PartSelect #: PS2040943
Manufacturer #: 40046601
  No Longer Available
Muffler, Hoz – Part Number: 7046445YP
Muffler, Hoz
PartSelect #: PS11832181
Manufacturer #: 7046445YP
$145.12
  Special Order
SWITCH, LIGHT – Part Number: 548221
SWITCH, LIGHT
PartSelect #: PS379163
Manufacturer #: 548221
  No Longer Available
POST, GROMMET – Part Number: 655586
POST, GROMMET
PartSelect #: PS882372
Manufacturer #: 655586
  No Longer Available
SCREW, OVERLOAD – Part Number: 595036
SCREW, OVERLOAD
PartSelect #: PS590794
Manufacturer #: 595036
  No Longer Available
Track – Part Number: 502197
Track
PartSelect #: PS12290468
Manufacturer #: 502197
  No Longer Available
Mnl, use & care – Part Number: 502199
Mnl, use & care
PartSelect #: PS12650045
Manufacturer #: 502199
  No Longer Available
Label, instr for use – Part Number: 500370
Label, instr for use
PartSelect #: PS12631447
Manufacturer #: 500370
  No Longer Available
Switch, pressure-3 p – Part Number: 38619
Switch, pressure-3 p
PartSelect #: PS12629525
Manufacturer #: 38619
$44.23
  Special Order
(C) BRACKET FRONT RH – Part Number: 7046420YP
(C) BRACKET FRONT RH
PartSelect #: PS18607026
Manufacturer #: 7046420YP
$74.01
  Special Order
Cycling Thermostat – Part Number: 504521
Cycling Thermostat
PartSelect #: PS12634602
Manufacturer #: 504521
Cycling thermostat, L125-15F
  No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No warm Water on rinse
Remove 3 screws on Washer control top. Then 3 screws holding clear cover and removed. Remove 3 phillips screws holding face of panel on and tilted panel to get at wires. Marked the wire colors on eace of 4 terminals and removed them. Used plires to push the top on the switch near the knob and turned the switch counterclockwise. When the lugs lined up the switch slid out the back. Just reversed the above to reinstall following the proper colors on the wires to reinstall. Washer works fine now.
Parts Used:
SWITCH- TE
  • Terry E. from Johnstown, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!