EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

867736430 Kenmore Furnace - Overview

Diagrams for 867736430

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw – Part Number: WP308544
$7.47
Special Order
Screw
Part #WP308544
SWITCH- TE – Part Number: 40046601
No Longer Available
SWITCH- TE
Part #40046601
Muffler, Hoz – Part Number: 7046445YP
$145.12
Special Order
Muffler, Hoz
Part #7046445YP
SWITCH, LIGHT – Part Number: 548221
No Longer Available
SWITCH, LIGHT
Part #548221
POST, GROMMET – Part Number: 655586
No Longer Available
POST, GROMMET
Part #655586
SCREW, OVERLOAD – Part Number: 595036
No Longer Available
SCREW, OVERLOAD
Part #595036
Orifice,lp – Part Number: 504092
No Longer Available
Orifice,lp
Part #504092
Housing * – Part Number: 48205
No Longer Available
Housing *
Part #48205
Manual, instal/op-ze – Part Number: 504165
No Longer Available
Manual, instal/op-ze
Part #504165
Cycling Thermostat – Part Number: 504521
No Longer Available
Cycling Thermostat
Part #504521
Cycling thermostat, L125-15F
Pipe cap – Part Number: 47193
$7.86
Special Order
Pipe cap
Part #47193
Label, instr for use – Part Number: 500370
No Longer Available
Label, instr for use
Part #500370
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No warm Water on rinse
0 of 1 people found this instruction helpful.
  • Terry E. from Johnstown, PA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Remove 3 screws on Washer control top. Then 3 screws holding clear cover and removed. Remove 3 phillips screws holding face of panel on and tilted panel to get at wires. Marked the wire colors on eace of 4 terminals and removed them. Used plires to push the top on the switch near the knob and turned the switch counterclockwise. When the l ugs lined up the switch slid out the back. Just reversed the above to reinstall following the proper colors on the wires to reinstall. Washer works fine now.
Was this helpful?
Thank you for voting!