8673NP Nutone Bath & Ventilation Fan - Overview

This is a genuine OEM sourced component which is specially produced for use with Broan and Nutone exhaust fans. It is an identical replacement for a missing or a faulty lamp socket assembly that secures the light bulb, please make sure to refer to the appropriate diagrams for the correct location and application of this hardware. This high-quality assembly is sold individually, keep in mind it has a 3-pin connection.

This motor is supplied by the original manufacturer for use in exhaust fans. It has a body diameter of 3 1/8 inches, a height of 2 inches, and a shaft diameter of 0.25 inches. The motor is responsible for powering the blades which circulate the air, reduce humidity, and remove odor and pollutants from the air. The motor can fail over time...Read more from overuse, lack of lubrication, debris build-up, electrical shorts, or normal wear and tear from aging. If the motor in an exhaust fan fails, the fan will stop working, leading to increased humidity from lack of ventilation, poor air quality, and inadequate air circulation. Begin the repair by ensuring that the power to the exhaust fan is turned off at the circuit breaker. Remove the fan cover to access the motor and carefully disconnect the electrical wires connecting the motor to the power supply. Remove the motor from its housing and place the new motor in its place. Secure it in place with the appropriate mounting hardware and reconnect the electrical wires to the appropriate terminals. Reattach the fan cover to complete your repair.

This is an authentic Nutone replacement part, sold individually. Includes wheel and clip. The Blower Wheel is the part that rotates inside the fan housing, producing airflow. It is compatible with the fan models listed below. Repair is fairly easy, requiring only a screwdriver.

This is a set of two metal springs that are sold as a pair. They attach to the grill assembly. A set of pliers may be needed to replace these parts if they become bent or broken. These are OEM parts directly sourced from the manufacturer for use in Broan ventilation fans and Nutone exhaust fans.

This item is available as an individual replacement part. The motor mount is made of rubber and attaches to the bracket. A screwdriver and a set of pliers might be helpful during the installation of this item. It may become broken and will need to be replaced. This is a Broan and Nutone replacement part directly sourced from the manufacturer and used in exhaust fans.