86041 Toro Chainsaw - Overview

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

It is an authentic OEM part that is specially made for use with Toro and Lawn Boy snowthrowers. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. It is one of the screws utilized to secure the upper and the lower handles. This high-quality component is made of durable metal and is sold a...Read mores an individual item. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application. A wrench will be needed to perform this repair.

This Belleville washer, also known as a Belleville spring, is a type of cone/cup shaped washer, used in lawn and outdoor equipment. It is a thin, metal disc that tapers towards the center and functions like a spring when it is compressed. When a load is placed on the washer, the spring is engaged, and this allows it to absorb shocks and p...Read morerevent loosening and leakages while the equipment is running. It is used in places that have heavy loads and require the maintenance of high tension, such as, under the head of a fastener or in between two equipment parts. Over time, the Belleville washer can crack or become deformed leading to a loss of tension, excessive vibration, instability, and falling parts. If you are positioning the washer under a fastener, first remove the fastener before removing the faulty washer, and if it is between two components, you may first need to disassemble the components. Each washer is sold separately.

It is a genuine replacement part that is supplied by the original manufacturer for use with Toro snowthrowers. This is a special hardware which helps to secure the scraper blade assembly, please make sure to check appropriate diagrams of your model for the correct application of this screw. It is a high-quality component which is made of durable metal and is sold individually.