85903 ((UVGT1621BV)(Series 1)) Snapper Lawn Mower - Overview

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to transfer fuel from the fuel tank to the carburetor, and over time and due to exposure of gas, this fuel line can become brittle and crack, requ...Read moreiring a replacement. If you find your equipment is performing worse, check the fuel line for any visible signs of damage. To replace the fuel line, you will need to disconnect the spark plug and drain the fuel from your equipment, before simply removing the old line and installing the new one and reassembling the rest of the motor.

It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches to the front wheel drive rear baffle. A flat head screwdriver will be necessary during the installation of this part. Over time this part may...Read more become stripped and will need to be replaced. Keep in mind this part is made of metal and is sold individually.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This ball joint is an authentic OEM component designed for use in lawnmowers and lawn tractors. It is found near the transmission assembly and is responsible for securing the drive system transfer link to the transmission assembly. Over time, the ball joint may experience wear and tear due to continuous use, exposure to dirt and debris, o...Read morer lack of lubrication. The drive system transfer link may disconnect from the transmission assembly, resulting in a loss of power transmission. As a result, the lawnmower may not move forward or backward when the engine is running. Remove the nut on the transfer link and the fasteners on the inside of the hex shaft shield. Carefully detach the ball joint. Secure the new ball joint to the transfer link and hex shaft shield to complete the repair.

It is a genuine component which is supplied by the original manufacturer. The bushing is specially designed for use with Snapper and Simplicity lawn mowers. It provides a tight fit for the suspension while allowing for movement with minimum friction. If the original item is damaged or is missing, this will provide an identical replacement...Read more. This suspension bushing is made of high-quality material and is sold as an individual item. Check the diagrams for your model to ensure the correct replacement procedure.

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

Key-ignition indak

This bolt is a genuine replacement part, most commonly found in tillers. It is sold individually, it is 3/8 of an inch in diameter, and made of metal. The bolt may be found in multiple locations, depending on your model, and is not the only style bolt used on most machines. Please refer to the parts diagram to be sure you are ordering th...Read moree correct bolt. This bolt needs to be replaced when the threads become damaged or rounded off. Use caution when replacing this bolt not to damage or strip the bolt, which will cause a wrench or socket not to grip it. To complete this repair, you will need a wrench or socket.

It is a genuine OEM sourced replacement screw which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This special hardware has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams of your unit for the correct location and us...Read moree of this item. This screw is made of high-quality metal and it is sold individually.