85650 ((SLBC55151BV)(Series 1)) Snapper Leaf Blower / Vacuum - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This bolt is a genuine OEM replacement part used in a variety of lawn and garden equipment. It is 2 inches long with a head diameter of 5/16 inches, and a thread pitch of 16 threads per inch. The bolt is used to secure the upper and lower handles on your equipment. If the bolt is stripped or damaged, your handles will become loose and fal...Read morel out of alignment. You may also notice increased shaking when using your equipment. Replace the bolt promptly as the handles can eventually collapse. Each bolt sold individually.

It is an authentic OEM item that is designed for use with a variety of lawn and garden equipment. A washer is a special part which helps to provide a tight fit between connected components. This part provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. It is a standard hardware which may ...Read morehave multiple applications. Make sure to check the appropriate diagrams for your specific model for the exact location and the correct application of this cone washer. Note, it is made of durable metal and is sold individually.

An authentic manufacturer sourced part which is supplied for use with Briggs and Stratton, Murray, and Snapper lawn and garden equipment. This replacement nut has a few different applications, please make sure to check the appropriate parts lists and diagrams of your model for the exact location of this hardware. Note, this durable metal nut is sold individually. You will need a wrench to secure or remove it.

This authentic OEM flat metal washer plays a crucial role in keeping your lawn equipment secure. When fastening bolts, screws, or nuts, it provides stability and prevents damage by evenly distributing the load applied to your machine. You can find it in various areas of your lawn equipment, depending on its make and model. Look for it whe...Read morere components are fastened together. This washer measures 0.05 inches in thickness, with an inside diameter of 0.64 inches and an outside diameter of 0.99 inches. If the washer is broken, you will notice deformations or cracks. It is important to replace a broken washer promptly to avoid components becoming loose or falling off your machine. To remove the washer, you will need a suitable wrench, pliers, or socket set to loosen and remove the nut, bolt, or screw that holds it in place. Please note that this replacement part is sold individually, so consult your user manual to determine how many washers your machine requires. It is recommended to replace all your washers at once since they tend to wear out at the same rate.

The screw attaches the steel blade to the blade hub. It is a genuine OEM sourced part which is specifically designed for use with lawn mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. This part is available as an individual replacement part and is made of metal. It will require replacing if it strips or breaks and when replacing this part a wrench will be needed.

Fw .438x1x.084 yz