84882 Snapper Lawn Mower - Overview

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

This rear axle, thick flange boot, also known simply as the boot, protects the rear axle of your riding lawn mower/tractor. It measures 4.75 x 3 inches, and is black and made of plastic. This part can dry out and crack due to fatigue and wear; you may notice a rip in it, and debris entering the hub of your mower. When this occurs, it is t...Read moreime to replace the boot, which our customers rated as a medium-difficulty repair. You will need to attach your new boot to the rear axle of your machine, and the repair will require a screwdriver, pliers, a socket set, wrench set, and snap ring pliers.

Inside some rear-engine riding mowers, a friction ring helps the clutch transfer power smoothly into the drive system. A glazed, cracked, bent, or badly worn ring can cause delayed movement, slipping, uneven takeoff, or loss of drive even while the engine runs normally. Check tire pressure, belt condition, cable adjustment, and the mating...Read more drive plate before choosing a replacement. Oil on the ring can also reduce grip. Match the replacement to the full equipment model and product number. Before service, turn off the engine, remove the key, disconnect starting power, and support the mower safely. Clean the contact area and follow the service diagram during installation.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This OEM plug is sold individually and measures just over an inch in diameter. It attaches to the case cove of your equipment, is black in color, made of plastic and will need to be replaced when the old plug is dry out, cracking, or generally showing signs of wear. You may observe grease leaking out if this part needs replacing. Dirt c...Read morean also get into the case if it is cracked, and cause problems over time such as a grinding noise. This is a somewhat challenging repair that requires a screwdriver, pliers, and a wrench.

This replacement switch is a genuine OEM part, not an aftermarket equivalent. It is supplied directly from original equipment manufacturer for Murray riding lawn mowers and tractors. This switch is secured under the seat to prevent the engine from running without a driver in a seat. Mechanical switches over time tend to wear out requiring replacement. Please note, this plastic switch is sold individually.

Unveil the full potential of your lawn tractor with Snapper's 33" High Lift Blade. This product's superior design features curved tips, devised to lift and discharge grass clippings with unmatched efficiency. It's a perfect fit if you have a collection bag attached to your tractor, enhancing versatility and convenience during use. It come...Read mores in a 1-piece package, boasting a center hole diameter of 1-1/16 inch, a length of 32-7/8 inches and a width of 2-3/4 inches. Installation is easy and straightforward, but be sure to stay safe - wear work gloves during the process! Experience increased lawn aesthetics and functionality with Snapper, a dependable choice for all your lawn care needs.

Switch push button no/nc snap-in

This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause. This is a very easy part to repair and does not require any tools.