8462 - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

It is a genuine component which is supplied by the original manufacturer. The bushing is specially designed for use with Snapper and Simplicity lawn mowers. It provides a tight fit for the suspension while allowing for movement with minimum friction. If the original item is damaged or is missing, this will provide an identical replacement...Read more. This suspension bushing is made of high-quality material and is sold as an individual item. Check the diagrams for your model to ensure the correct replacement procedure.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This is an original replacement part sourced directly from the manufacturer. The hex nut is commonly found in Snapper lawn tractors and riding mowers. This part is made of metal, and is generally used in securing the pulley and mower blade assembly. Please be aware that there are different nuts used in the machine. Refer to the parts ...Read morediagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The hex nut is sold individually.

This high-quality OEM replacement blade is specially designed for use with Snapper lawn mowers. Mulching blades are designed to circulate the grass longer so it can be cut into smaller pieces allowing them to decompose quicker, releasing nutrients into the soil. Over time blades will wear down, become dull or they may warp eventually requ...Read moreiring replacement. This part is made from high-quality steel and is sold individually. Make sure to refer to the owner's manual for your model to ensure the correct application and repair procedure. A wrench will be needed to remove and resecure the hardware that holds the blade.

The pushnut retainer goes next to the ball bearing. This is available as an individual replacement part. This item is an OEM from Snapper, Murray, and Simplicity for use in lawn mowers, lawn tractors, and snowblowers. It might require a wrench to replace this part. It is made of metal and will need to be replaced if it breaks.

This is an authentic OEM sourced replacement part that has been sourced from the original manufacturer to be used with lawn tractors from Snapper and Simplicity. The metal bushing fits into the front wheel mounting bracket. This item is used to provide spacing between the caster and the bracket assembly. The caster busing is sold individually.

This is a genuine manufacturer-approved part which is specially designed for use with Snapper and Simplicity lawn mowers. It is one of the gauge wheels that are attached to the deck in order to provide support for it while allowing for easy movement. This is an identical replacement for a missing or a damaged component that was installed ...Read moreon a new unit. It is made of high-quality material and is sold individually. Note, the hardware to secure it is sold separately. You will need a socket wrench to remove and secure the bolt that holds the wheel.

This authentic OEM approved replacement bolt is designed to support deck gauge wheel. It is a commonly used item on riding lawn mowers/tractors. It has a hex head and it is sold individually. When installing or removing this bolt please use appropriately sized socket wrench.

This OEM valve stem regulates air flow in and out of tires, allowing for inflation and deflation. It features an 11.5mm outer diameter, 31.75mm total length, and 22.35mm effective length. It is a metal valve with a threaded plastic cap, housed in plastic. To determine if a valve stem is broken, you can check for signs of damage or leakage...Read more. Signs of a broken valve stem include cracks, bends, or air leakage, which should be replaced to prevent tire deflation and operational issues. To remove the valve stem, fully deflate the tire first. Then, disconnect the tire from the rim to access the inner part of the rim. You may need to unthread any securing nuts if present. Use a pair of pliers to grip at the base of the valve stem and then unscrew it from the rim hole.

Hb 5/8c x7-1/2 gr5

(c) sleeve axle