84595 ((LT160H42GBV2)(Series G)) Snapper Lawn Tractor - Overview

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

This OEM hub cap keeps debris out of the hub and axle of your lawn mower. It is black in color, sold individually, and made of plastic. Over time, your hub cap may get removed or damaged due to fatigue and wear. If you notice it is missing or damaged, you will need to replace the hub cab. This is an easy repair that just requires the us...Read moree of a flat blade screwedriver for removal, and a rubber mallet for installing the new one inside the wheel hub.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This replacement switch is a genuine OEM part, not an aftermarket equivalent. It is supplied directly from original equipment manufacturer for Murray riding lawn mowers and tractors. This switch is secured under the seat to prevent the engine from running without a driver in a seat. Mechanical switches over time tend to wear out requiring replacement. Please note, this plastic switch is sold individually.

Enhance the performance of your lawn mower with the Snapper Blade designed specifically for Assuring high-quality cutting. This blade is 21 inches in length offering an optimal cutting width. With an efficient Standard Lift design, it effectively lifts the grass for a perfect, even cut. Safeguard yourself while installing with the usage o...Read moref work gloves. Amplify your mowing experience with this stunning Alloy Blade, achieve the most out of your lawn mowing tasks, and observe the noticeable difference in your yard's look. The Snapper Blade ensures an immaculate, clean-cut each mowing session, making yard maintenance a breeze!

This is a genuine Snapper replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal wheel bearing is used to provide spacing between the center of the wheel and the axle spindle. This part is priced as a single item, please note two bearings may be needed per wheel.

This authentic item is supplied by the original equipment manufacturer for use with Snapper and Simplicity riding lawn mowers and garden tractors. It is one of the covers for the cushion holder springs. The cover is designed to protect it from dust and other debris which can compromise its functionality. Over time it may wear out or crack...Read more eventually requiring a replacement. Refer to the diagrams of your model for the exact location of this component. Replacing it is a simple task that should not require any special tools, simply pull off the old cover and press on the new one. One durable rubber part is included. Note, the spring itself is not included, it is sold separately.

Retainer, ring, 3/4

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

Key-ignition indak