8432 - Overview

The tine thatching spring or thatcher attachment spring tine for your lawn mower attaches to the spring alignment rod and pulls dead grass and roots to the surface. This part is black in color and is made of metal. It is an OEM part sourced directly from the manufacturer and is sold individually. Be sure to wear work gloves when you are replacing the tine thatching spring.

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

The Throttle Box Assembly, or the Throttle Assembly, is a kit that includes the housing, handle, and hardware. It is black and constructed of steel and plastic. It can be installed onto the right hand upper handle, using a screwdriver and pliers, and is rated as Medium difficulty to install. This kit contains the parts that control the ...Read moreamount of the air and fuel entering the engine. When the part breaks (likely due to fatigue) you will no longer be able to control the engine. If nothing happens when you move the handle, that means it has become disconnected. When the part is broken it must be replaced. Check your model number to ensure you are selecting the correct replacement part.

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

Upgrade your lawn mower with this high-quality wheel from the revered brand, Snapper. Perfectly designed to fit a variety of lawn mowers, this 10 X 1.75 sized Gray wheel offers superior durability and improved traction for effortless mowing. Be sure to put on work gloves when installing this wheel for safeguarding your hands. This Snapper...Read more gray wheel has been carefully crafted to assist your mower in achieving an impeccably maintained lawn. Effortless to fit, this wheel unlocks your ability to swiftly maneuver through tougher terrains with ease. Get your Snapper mower running like new again with this indispensable wheel replacement.

This is a original manufacturer sourced replacement part used on Snapper lawn mowers. This is the ground drive belt that connects the engine crankshaft pulley to the transmission pulley. This part is made out of rubber and it is sold individually. Clean the pulleys off before installing the new belt to ensure top performance and longevit...Read morey with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance. To replace this belt you would need a wrench and a screwdriver.

This replacement engine drive belt is a genuine Snapper item, not an aftermarket equivalent. It is supplied by original equipment manufacturer for use on lawn mowers. This belt helps to driver the mower. Over time belts tend to stretch and wear out requiring replacement. Please note, this rubber belt is sold individually. Replacing this drive belt will require a wrench set.

The Chute Plug is a plastic, black, individually sold part which covers the grass bag chute and is rated as "Easy" to install. This is an OEM part and if broken, it should be replaced. Refer to your make, model and diagram to ensure you've chosen the correct part.

Made of durable silver plastic, this Flange Bearing is an authentic manufacturer-source replacement part for hundreds of models of lawn and garden equipment. It is used to allow a shaft to connect while moving smoothly and freely and is sold individually. When this part malfunctions, you may notice the shaft becomes very sloppy or comes...Read more disconnected. To complete this repair, you will need a screwdriver, a socket set, and pliers. Customers rate this repair as Medium difficulty.

This is a genuine Snapper part. The axle bushing is constructed of high-quality metal, and is compatible with many lawn mower devices. This part helps to reinforce the front and rear wheel rims. Keep in mind this item is sold individually. A wrench and a screwdriver are needed in the removal and replacement.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This steel piece is an authentic replacement part manufactured for Snapper tractors and mowers. Ball bearings reduce friction between moving metal parts. Metal fatigue causes wear on ball bearings and they should be replaced regularly. A screwdriver and/or wrench will commonly be needed to remove/replace this part.