835026 (000101) Ariens Lawn Tractor - Overview

This Bearing Cone, or Cone Bearing, is used to support the helicon pinion shaft to allow it to rotate where it passes through an assembly. It is sourced directly from the manufacturer for use in snow blowers, is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A grinding, growling, or squealing sound ...Read morefrom your bearing suggests that your bearing cone will need to be replaced. If you find signs of wear, fatigue, or damage on the Cone, it needs to be replaced. You will need a wrench set, a socket set, a screwdriver, and a nut driver to complete this repair. When you install the new Cone, ensure that you pack the bearing with grease before installing it. Customers rate this repair as Medium difficulty.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This Bearing Cup is a genuine replacement part for various models of snow blowers. It is used to carry the maximum combinations of radial and thrust loads simultaneously. It is made of metal, is silver, is not part of a kit or assembly, and is sold individually. This part may make a grinding noise when it is malfunctioning. It should be...Read more replaced when it is visibly worn or damaged. It is found on the helicon shaft with the Cone Bearing and Adjustment Plug. You will need a screwdriver, pliers, a socket set, and a wrench set to complete this repair. Customers rate this repair as Medium difficulty.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

This replacement part is used to connect the mower blade to the base of the mower deck. It is made of metal, is gold, is not part of a kit or assembly, and is sold individually. The Bearing Slinger is most often located on the spindle housing of the mower deck and needs to be replaced if it is broken, worn, or damaged. This part is know...Read moren to become worn through regular use of your machine. Customers rated this repair as Medium difficulty.

This authentic OEM sourced component is specially made for use with Ariens lawn and garden equipment. Ball bearings are generally utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over t...Read moreime due to heat, pressure and friction bearings tend to wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Ariens lawn and garden equipment. It is an identical replacement for a missing flange bushing that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and a...Read morepplication of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This genuine replacement hardware is sourced directly from the original equipment manufacturer for use with Ariens lawn and garden equipment. It is a specialized self-tapping screw designed to create its own threads as it is driven into material, ensuring a secure fit. The screw features a durable metal hex head and may serve multiple pur...Read moreposes depending on your specific model. To ensure proper installation and placement, please consult the appropriate diagrams for your equipment. This item is sold individually.

This is an authentic Ariens replacement part, sourced from the original manufacturer for use with riding lawnmowers. The special hex nut is used with a variety of different lawnmowers and the application of the nut can vary based on the model of mower. This jam nut is available as an individual replacement part.

This is an original part from the Ariens manufacturer. The cotter pin (1/8 x 1 plated) is made of durable metal, and is compatible with many snowblower machines. This component is often used to secure the chute crank. The cotter pin is sold individually. Please be sure to refer to specific manual and diagrams for repair instructions. A screwdriver may be helpful in making the replacement.

This grass bagger basket is designed to collect grass clippings and leaves efficiently for a cleaner, more finished lawn. Built with durable materials for regular use, it fits into rear bagging systems to help maintain strong airflow and reliable collection. Ideal for replacing a damaged or worn container, it restores proper bagging performance and helps keep mowing areas neat and debris-free.