831L Cub Cadet Log Splitter - Overview

This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent the nut from backing off and becoming loose on the pulley shaft, and is attached to the drive belt pulley assembly. You will know if you nee...Read mored this because your owners manual will specify it, or the model number of your machine will correspond with this part. If the part is broken due to fatigue, the shafts will free spin when they should be locked together, and must be replaced.

Introducing the Adjustable Gib by MTD, a vital component for your log splitter. This 2'' long spacer is designed to be positioned between the wedge assembly and back plate of your log splitter. Its role is crucial for the seamless operation of your equipment, ensuring maximum productivity. Should your gib be worn or damaged, a replacement...Read more is readily at hand to take its place. To ensure safety during installation, it is recommended to wear work gloves. Upgrade your log splitter's performance today with our MTD Adjustable Gib.

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.

This OEM Hub Cap, or Dust Cap, is a 2-inch, silver, steel part, sold individually. It requires a Rubber Mallet to install and its installation is rated as Easy by our customers. This part attaches inside the wheel on the hub, and is used to keep dirt out of the hub. It must be replaced when damaged or missing (if it is damaged it will b...Read moree out of round, and will not fit). Check your model number to ensure you are purchasing the correct part.

This fuel tank is a genuine OEM replacement part supplied by the original equipment manufacturer. It is commonly used in engines, shredders, and snowthrowers. This black fuel tank is made of plastic. It should be replaced if it is cracked, broken, or damaged. To replace this part, simply remove the brackets with a screwdriver. Please note the cap is included with the purchase of this part.

This OEM replacement washer is often used on several different types of lawn and garden equipment, but can also be used on compatible home trimmers. It is made of metal, meaning it is vulnerable to corrosion and will produce more noise from your lawn equipment or trimmer if it has broken. Its main purpose is to reduce rattling and noise, ...Read moreor to better secure and evenly distribute pressure between two different parts. This washer has a .38-inch inner diameter, .87-inch outer diameter, and .09-inch thickness and is sold individually.

This grease seal, also known as an oil seal or a shaft seal, in your log splitter or chipper shredder serves as a protective barrier. It keeps lubrication inside the bearings and stops dirt from entering them. It is commonly located in the wheel hubs or axle assemblies of your machine. A broken grease seal leads to contaminated bearings. ...Read moreYour machine will then undertake more friction and can overheat, reducing its performance. You will need a seal puller or a flathead screwdriver to pry a grease seal out of your machine. When installing the new grease seal, apply a thin layer of lubricant to its inner surface before pressing it into its housing. Please be informed that this OEM-certified component is sold individually.

Introducing the Control Handle Assembly from the renowned brand MTD. This essential piece is designed for use with log splitters, effectively attaching to the control valve to ensure optimal operation. Crafted with precision and utmost attention to detail, it promises a secure fit and robust performance. For safe installation, remember to...Read more don your work gloves to keep your hands protected. Trust in MTD's exceptional manufacturing standards for reliable, lasting functionality with this Control Handle Assembly. Happy repairing!

This is an authentic replacement part, sourced from the original manufacturer for use with hydraulic log splitters. The metal nipple pipe is commonly used to link the hydraulic cylinder and the control valve. This nipple pipe is available as an individual replacement part, please see model diagram for associative parts.