82D-12 Maytag Range - Overview

Diagrams for 82D-12

See every part. Know exactly what you need.

Parts for the 82D-12

$36.85

Valve Knob

★★★★★

(4)

Part #WP7711P135-60

This valve knob is also known as control knob, burn valve, and burner knob. It fits on your stovetop or range to control the heat of the surface burner. No tools are required for this repair, simply remove your old knob by lifting straight up and off, and replace with the new knob by aligning the D-shapes on the shaft and knob and pushing...Read more

Read less

GRATE BURNER

★★★★★

(2)

Part #W11400301

This square burner grate has sides measuring approximately nine inches. It is all black in color.

Safety Valve - just over four inches long

Part #WP7501P133-60

This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range. This safety valve has an amperage range of 3.3 to 3.6 amps. The valve body is just over four inches long.

BURNER, TOP LEFT

Part #7505P160-60

USE ERP 2908G0077

Part #7505P161-60

VALVE

Part #7502P122-60

BURNER- PI

Part #7505P159-60

Top, main

Part #5425A022-86

Common Symptoms of the 82D-12

How this model fails, and the parts that fix it.

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

the oven igniter would glow but the gas wouldn't turn on

16 of 20 people found this instruction helpful.

peter from marine city, MI
Really Easy
15 - 30 mins
Pliers, Screw drivers

After removing the oven door, floor, and gas-jet diffuser plate, I could see the valve. There was a shield ov er the elec connections, which I removed. I turned off the gas line to the oven and elec power from the wall, then disconnected the valve. The orig valve had a mounting bracket which I swapped to the new valve( the holes lined up ... Read more

Read less

Was this helpful?

Oven would not lite

11 of 14 people found this instruction helpful.

Timothy from Petaluma, CA
Easy
1- 2 hours
Pliers, Screw drivers

With a little adjustment to the mount the part went in ok. Checked the oven works like new; well better than new.

Was this helpful?

the burner knobs broke off

10 of 17 people found this instruction helpful.

Belinda from Downey, CA
Really Easy
Less than 15 mins

I put the 2 burner knobs on and now I have 4 working burners....Thanks for the quick delivery....

Was this helpful?