8285 - Overview

This is a genuine Snapper part. The axle bushing is constructed of high-quality metal, and is compatible with many lawn mower devices. This part helps to reinforce the front and rear wheel rims. Keep in mind this item is sold individually. A wrench and a screwdriver are needed in the removal and replacement.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is an authentic item that is supplied by the original manufacturer for use with Snapper lawn and garden equipment. The spring is utilized to apply tension on the latch. Over time the part can wear out and stretch eventually requiring a replacement. Please note this high-quality metal extension spring is sold individually. You may nee...Read mored pliers to perform this repair. Refer to the appropriate diagrams for your model when replacing this component.

An authentic item that is supplied directly from the original equipment manufacturer. This replacement side chute is a high-quality item designed for use with Snapper and Simplicity lawn mowers. It is mounted to the side of the mower deck for the cut grass to be expelled out of. This part is made of durable plastic and it is sold individually, please note the hardware to secure it is sold separately.

This is a genuine Snapper replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The idler pulley attaches to the idler clutch arm and is used to engage the drive belt. The idler pulley is priced as a single item.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This hex center lock nut secures various components of your lawn equipment in place. With a 7/16-inch diameter and 20 threads per inch, it has a hexagonal shape and a locking mechanism that prevents loosening caused by vibrations. It can typically be found on wheel axles or the chain case assembly, depending on the model. A broken lock nu...Read moret may easily come undone and have stripped or fractured threads. Your machine may also excessively vibrate and make noise. Failing to replace a damaged nut can lead to component detachment during operation, posing safety risks to you and others nearby. To replace a nut, consult your user manual to locate it and access it by removing necessary covers and components. Use a socket or wrench to loosen and remove it. Keep in mind that this OEM replacement part is sold individually, so ensure you purchase the correct quantity required for your machine.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

It is a genuine item that is supplied by the original equipment manufacturer for use with Snapper lawn mowers. This special axle is utilized to secure the rear foot guard. If the component is missing or damaged, this part will provide an identical replacement for the original item that was installed on a new unit. Note, it is made of dura...Read moreble metal and is sold individually. A wrench set will be needed to perform this repair. Check the diagrams for your model to ensure the correct replacement procedure.

This is a genuine Snapper replacement part that is supplied directly from original equipment manufacturer for use on lawn mowers. It is a hi-lift blade that is designed with larger wind wings, they help to increase the airflow and assist in bagging grass clippings. Mower blades can be sharpened several times to extend their life and ensur...Read moree that your grass gets a healthy cut, but they can only be filed so many times before a blade replacement is necessary. This part is made from durable metal and it is sold individually.

This is a genuine Murray and Snapper replacement part for use in lawn mowers and lawn tractors. The cap screw attaches to the idler pulley. A wrench may be needed during the replacement of this part. It is made out of metal and will need to be replaced if it strips or breaks. This item is sold individually.

The wing-nut is made out of metal and attaches to various other parts. It is a genuine OEM sourced part which is specially designed for use with lawn tractors made by Snapper and Simplicity. This part is available as an individual replacement even though several may be needed. It will need to be replaced if it becomes broken or stripped.