8253 Lawn Mower - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

Retainer, ring, 3/4

It is a genuine component which is supplied by the original manufacturer. The bushing is specially designed for use with Snapper and Simplicity lawn mowers. It provides a tight fit for the suspension while allowing for movement with minimum friction. If the original item is damaged or is missing, this will provide an identical replacement...Read more. This suspension bushing is made of high-quality material and is sold as an individual item. Check the diagrams for your model to ensure the correct replacement procedure.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

Key-ignition indak

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to th...Read moree appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.

The oil filter attaches to the filter base and is made of metal. This item is available as an individual replacement part. It is an OEM from Snapper and Simplicity for use in tractors. A wrench might be needed during the installation process. It will require replacing if it becomes broken or dirty.

It is a genuine manufacturer-sourced component which is specially made for use with Murray, Snapper and Simplicity riding lawn mowers and garden tractors. It is the part of the equipment that allows a user to engage and disengage the blades. Unfortunately, over time components will wear out and may begin to fail eventually requiring a rep...Read morelacement. Keep in mind this high-quality plastic body switch is sold individually. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this part.

It is an authentic manufacturer-sourced component which is specially designed for use with Snapper and Simplicity snowthrowers. The purpose of this bushing is to help to secure the axle shaft allowing it to rotate with minimum friction. If the original item is damaged or is missing, this will provide an identical replacement. This part is...Read more made of high-quality metal and is sold individually. Check the owner's manual and the diagrams for your model to ensure the correct replacement procedure. A wrench set will be needed to perform this repair.