82363 ((BH600)(Series 0)) Snapper Lawn Mower - Overview

It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches to the front wheel drive rear baffle. A flat head screwdriver will be necessary during the installation of this part. Over time this part may...Read more become stripped and will need to be replaced. Keep in mind this part is made of metal and is sold individually.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This is a genuine Murray and Snapper replacement part for use in lawn mowers and lawn tractors. The cap screw attaches to the idler pulley. A wrench may be needed during the replacement of this part. It is made out of metal and will need to be replaced if it strips or breaks. This item is sold individually.

This is an original replacement bolt commonly used on lawn and garden equipment. It is supplied from manufacturer for use with lawn mowers and snow blowers/throwers. The purpose of this bolt is to secure the upper handle to the unit. It is designed with a square are under bolts head which helps it to stay put while the lock knob is being secured. Includes one (1) bolt per order.

This replacement screw is supplied directly from the original equipment manufacturer for use with Murray walk-behind lawn mowers. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this part. This is a high-quality co...Read moremponent which is made of durable metal and it is sold individually, the washer is included.

This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The special double cable clamp is commonly used to secure the cables to the handle assembly. This double cable clamp is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine OEM sourced item that is supplied for use with lawn and garden equipment. It is an identical replacement for a missing or a damaged nut that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

Hair pin zp

This is an authentic Briggs & Stratton replacement part. The muffler screw lock is designed by the manufacturer for use in engines such as those found in snowthrowers. This part is made of metal, and is used to help secure the muffler assembly. You may require a wrench when replacing this part. This item is sold individually.