8213 - Overview

This ball joint is an authentic OEM component designed for use in lawnmowers and lawn tractors. It is found near the transmission assembly and is responsible for securing the drive system transfer link to the transmission assembly. Over time, the ball joint may experience wear and tear due to continuous use, exposure to dirt and debris, o...Read morer lack of lubrication. The drive system transfer link may disconnect from the transmission assembly, resulting in a loss of power transmission. As a result, the lawnmower may not move forward or backward when the engine is running. Remove the nut on the transfer link and the fasteners on the inside of the hex shaft shield. Carefully detach the ball joint. Secure the new ball joint to the transfer link and hex shaft shield to complete the repair.

This replacement ball bearing is an authentic OEM component which is designed for use with Murray and Snapper lawn and garden equipment. Bearings are utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. S...Read moreymptoms of failing bearing may include squealing, screeching, and an entirely new type of "grinding" (usually heard or felt as the motor powers-down). This high-quality component is made of durable metal and is sold as an individual part. A wrench set will be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

This genuine manufacturer-sourced replacement part is specially designed for use with Snapper riding lawn mowers. A locknut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which has multiple applications, please refer to the appropriate diagrams of your model for the correct location a...Read morend use of this part. Keep in mind this durable metal component is sold individually.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

This is an authentic replacement part manufactured for use with Snapper riding lawn mowers. The special hex head screw is commonly used to secure the blade to the spindle assembly. This screw is sold as an individual replacement part, please see model diagram for associative parts.

This is a genuine item that is supplied by the original equipment manufacturer for use with Murray and Snapper lawn and garden equipment. It is an identical replacement for a missing or a faulty lever that was installed on a new unit, please make sure to refer to the appropriate diagram of your model for the correct location and applicati...Read moreon of this component. This high-quality item is made of durable plastic and is sold individually, keep in mind the hardware to secure it is sold separately.

Pin 5/16-x1.68

Key woodruff #605

The ignition switch attaches to the internal lockwasher and the hex nut. It is an OEM replacement part for use in lawn tractors made by Snapper, Murray, and Simplicity. This part is available individually and is made of metal. A wrench may be required to replace this part if it becomes broken.

This is an original part from the Snapper manufacturer. The A-112 belt is constructed of a rubber composite, and is made for use with many lawn tractor machines. The belt is fitted onto the spindle assembly and pulleys, transmitting force to related components. This item is sold individually. A wrench and a screwdriver are necessary for t...Read morehe replacement. It is recommended to purchase a spare as belts can wear out over time and regular use.

This 3/4-16 hex jam nut is an original part from Snapper. The metal nut is compatible with many riding lawn mower engines, and is sold individually. This item assists with securing the spindle pulley. A wrench and pliers are needed for the installation.

This piece of end cap trim can be used for either the refrigerator door shelf or the freezer door shelf.