815002 (000101) Ariens Lawn Mower - Overview

This item is sold individually and is made of metal. The flange bushing attaches to the flat steel washer and the wheel. A set of pliers, a socket set, and a screwdriver might be needed during the installation process. Over time this part may break and will need to be replaced. This is a genuine Ariens part sourced directly from the manufacturer for use in snowblowers and lawn tractors.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It helps secure the skid shoe runner to the deck and is engineered to resist loosening when properly threaded onto a bolt, ensuring a stable and reliable connection. Made from durable metal, this high-quality part is sold individually. For safe installation, be sure to use a properly sized wrench.

This OEM part is a zerk fitting that is sometimes called a grease fitting, lube fitting, grease zerk, or Alemite fitting. It is a metal nipple that you connect a grease gun to, allowing you to lubricate the moving parts in your lawn equipment, usually on joints or bearings. This fitting is 1/4 inch wide, has 28 threads per inch, and a thr...Read moreeaded portion that is .256 inches long. If the fitting is broken, you may notice that your machine is moving sluggishly, or the fitting may appear cracked or clogged with debris. It is important to replace a damaged fitting right away, because if you do not, debris can prevent the fitting from accepting grease and the moving parts of your machine will wear out faster and eventually break down completely. To replace the fitting, you will need to use a wrench to remove it from your machine. Keep in mind that this replacement part is sold separately, so you may want to consider stocking up on fittings before you need them. Since the fittings on your machine wear out at the same rate, having a few extra on hand can save you time and hassle down the road.

This is an original part from the Ariens manufacturer. The cotter pin (1/8 x 1 plated) is made of durable metal, and is compatible with many snowblower machines. This component is often used to secure the chute crank. The cotter pin is sold individually. Please be sure to refer to specific manual and diagrams for repair instructions. A screwdriver may be helpful in making the replacement.

This genuine OEM lock nut is designed for use with Ariens snow blowers and throwers. It plays a key role in securing the skid shoe runner to the deck, helping to maintain proper alignment and performance. The lock nut is engineered to resist loosening when properly threaded onto a bolt, ensuring a secure and lasting fit. Made from dura...Read moreble metal, this high-quality part is sold individually. For safe and effective installation, use a properly sized wrench.

This genuine OEM hair pin is a manufacturer-sourced replacement part designed for use with Ariens snowblowers. As a standard hardware component, it serves multiple functions depending on the specific model, such as securing linkages or pivot points. Constructed from durable metal for long-lasting performance, this hair pin is engineered t...Read moreo withstand the rigors of outdoor equipment use. It is sold individually and may be required in various locations on your machine. For proper placement and application, please consult your model’s parts diagram or service manual.

This is an original replacement part sourced directly from the manufacturer. The hex nut is commonly found in snowblowers and tractors from Ariens. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts ...Read morediagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The hex nut is sold as an individual replacement part.

This is a genuine Ariens replacement part. The locking washer is designed by the manufacturer for use in snowblowers and snow brushes. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different washers used in the machine. Refer to the parts diagram to...Read more be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.