8140 - Overview
Models starting with 8140
Click on the best match to narrow your results.
- 8140 (Type 1A1) Black and Decker Hedge Trimmer (Hedge Trimmer)
- 8140 (Type 1A) Black and Decker Hedge Trimmer (Hedge Trimmer)
- 8140 (Type 11) Black and Decker Hedge Trimmer (Hedge Trimmer)
- 8140 (Type 1) Black and Decker Hedge Trimmer (Hedge Trimmer)
- 8140 Charmglow Grill (BBQ)
- 814000 Amana Cooktop (BUILT-IN COOKTOP & ACCESSORIES)
- 81401-0132-XX Briggs and Stratton Engine (Horizontal Engine)
- 81402-0133-XX Briggs and Stratton Engine (Horizontal Engine)
- 81402-0134-XX Briggs and Stratton Engine (Horizontal Engine)
- 81402-0155-XX Briggs and Stratton Engine (Horizontal Engine)
- 81402-0269-XX Briggs and Stratton Engine (Horizontal Engine)
- 81403-0134-XX Briggs and Stratton Engine (Horizontal Engine)
- 81406-0135-XX Briggs and Stratton Engine (Horizontal Engine)
- 8140XL Norelco Shaver Razor (Speed XL Razor)
Keep searches simple, eg. "belt" or "pump".
Grommet
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube.
The part is made of rubber and ...
$6.40
In Stock
Seal-oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$7.47
In Stock
Gasket-intake
PartSelect #: PS8941014
Manufacturer #: 27355S
This is an authentic manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. This carburetor intake gasket which provides an air tight seal for the carburet...
$6.40
In Stock
Burner Control Switch Kit - 8 Inch
PartSelect #: PS11747955
Manufacturer #: WPR0702021
This is an OEM part sourced directly from the manufacturer. This switch kit is designed to help you operate the 8? surface burner on your range or cooktop. This witch turns the surface burner on and o...
No Longer Available
Line-fuel
PartSelect #: PS9140673
Manufacturer #: 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to tra...
$16.54
On Order
Gasket-breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$6.40
In Stock
Engine Spark Plug Boot
PartSelect #: PS9055852
Manufacturer #: 66538S
This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style de...
$6.40
In Stock
Filter-pre Cleaner
PartSelect #: PS8937831
Manufacturer #: 271466
This is an OEM approved replacement part designed for gas trimmers/brush cutters. Its purpose is to filter out dust and debris from the air that goes into the unit. Over time it will get dirty and clo...
$6.40
In Stock
Clamp-hose
PartSelect #: PS9140678
Manufacturer #: 791850
This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Kee...
$6.40
In Stock
Filter-a/c Foam
PartSelect #: PS8941642
Manufacturer #: 27987S
This air cleaner element is supplied from original manufacturer. It is specially designed for use with Briggs and Stratton engines used on lawn and garden equipment. It is used to filter out dust from...
No Longer Available
Screw
PartSelect #: PS9063630
Manufacturer #: 691061
This is an authentic OEM component from Briggs & Stratton. The magneto armature screw is compatible with many lawn and garden engines. The hardened metal screw helps to mount the magneto armature. A w...
$6.40
In Stock
Ball-Clutch
PartSelect #: PS9064356
Manufacturer #: 691604
The clutch ball allows the center part of the ratchet to turn backwards freely but catch when turned forward in your engine. This is an OEM part that is made of metal, and it is silver in color.
Thi...
No Longer Available
Exact Part matches for your search term
[Viewing 3 of 3]
FILTER, ALUMINUM GREASE
This part number matches the current model number 8140
PartSelect #: PS4092578
Manufacturer #: 8140
No Longer Available
Nut
This part number matches the current model number 8140
PartSelect #: PS10016673
Manufacturer #: 8140
No Longer Available
DRAFT HOOD KIT (399)
This part number matches the current model number 8140
PartSelect #: PS19462127
Manufacturer #: 8140
$227.97
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Could not keep an aftermarket muffler on the engine.
Once I determined what OEM muffler I needed, installation was relatively easy. I have a 1982 4hp Briggs on my Snapper tiller. There was a 90* galvanized elbow coming out of the exhaust port, with a bezel nut to lock it down. Do not remove the elbow, even though it appears that you should. If you install the muffler without the elbow the m
... Read more
uffler will parallel the the vacuum for the carburetor and can melt the rubber couplers. Use the elbow to direct the heat away from the carburetor. Use a pipe wrench to lock down the bezel nut because the weight of the muffler, especially under vibration, can work loose and fall down on the tine belt cover and melt it. The bezel nut that comes with the muffler should also be used to lock down the muffler to the threaded intake bracket that comes with the muffler, not to replace the bezel nut for the elbow.
Read less
Parts Used:
-
Richard from KERNERSVILLE, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
13 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken prong that knob fit onto
This was a piece of cake! We put off doing this for ourselves because we thought it would be difficult. We sold the house and "had" to do it. Turns out we should have done it for ourselves a long time ago.
Parts Used:
-
Lisa from Oklahoma City, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
7 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Stem On The Burner Control Sw Broke Off
I used a phillips screwdriver to remove the control switch. I drew a diagram on a piece paper where the wire contacts connected I wrote the different # and wire colors down . I compared the 2 switches they were the same. So I connected the wires . I put the 2 screws on. The stem was higher than the other switchers. So I had to cut
... Read more
the stem shorter. It had groves so it was easy to use a hacksaw to cut a little then use a lock pliers to hold the stem and another to break it off then it fit perfect I put the knob on presto new switch. Just like new.
Read less
Parts Used:
-
charles from franklin, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!