This is white touch up paint for refrigerators, microwaves, ranges, dryers, and freezers. It is used to cover, or touch up, nicks and scratches on the appliance from wear and tear. It is an 18ml bottle that contains paint and a small brush for easy application. It is a little over 2 inches tall. This is an OEM part that is sourced directl...Read morey from the genuine manufacturer, and is meant to be an exact match to the color of the appliance. If the appliance is not white, please see other colors such as almond or black.
This is a plastic OEM drain plug that is attached to the drain system of your appliance and is compatible with several different makes and models of refrigerators, freezers, and air conditioners. This drain plug is used to prevent water from leaking out of the incorrect drain system within the appliance and is normally removed for cleanin...Read moreg and maintenance. If you notice water leaking inside of your appliance, the plug may be improperly positioned or may need replacing. To replace, simply pull off the damaged plug and insert the new plug in its place.
Keep your refrigerator or freezer running efficiently with this complete compressor kit. The compressor serves as the heart of the cooling system, pressurizing and circulating refrigerant through the evaporator and condenser coils to maintain consistent internal temperatures. This kit includes all essential components for installation, su...Read morech as the compressor, start relay, capacitor, filter drier, drain pan, tubing extensions, thermal mastic, and a label. Operating on 100–115 volts at 50/60 Hz and using R134A refrigerant, it’s designed for reliable performance. Replacing the compressor may resolve issues like the appliance not starting, inconsistent cooling, or unusual noises. For safety, always disconnect power before installation and follow proper handling guidelines.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Clicking sound then within a minute clicking again, not cooling.
81 of 97 peoplefound this instruction helpful.
Melvin from Semmes, AL
Easy
Less than 15 mins
UNPLUG REFRIGERATOR. Carefully remove relay from the side of the compressor. You shouldn't need a tool to do this, if it is hard you can gently pry the edge with a flat head screw driver just to loosen. Unplug white and red wires from relay, noting that the white wire goes in the hole with a #2 stamped beside it. Shake old relay, if it r
... Read moreattles like a baby rattler then it's most likely the problem. Replace wires into the new relay and plug back into the compressor.
Read less
Was this helpful?
Thank you for voting!
Stopped working, cooling.
15 of 19 peoplefound this instruction helpful.
Jennifer from Jonestown, TX
Easy
15 - 30 mins
Screw drivers
I used a small screwdriver to disconnect wires from old starter. I connected the overload and starter, two wires. I put the unit back in the keeper, plugged the unit in, turned up the thermostat and it's working beautifully.
Was this helpful?
Thank you for voting!
Freezer quit. Compressor would not start.
9 of 11 peoplefound this instruction helpful.
Steve from Neosho, MO
Really Easy
15 - 30 mins
Pliers, Screw drivers
Like another post, the start relay rattled like a baby rattle. Replaced the start relay and freezer works great.