80770 Shindaiwa Sprayer - Overview

This OEM Fuel Filter is a white and silver, steel part, sold individually. It requires a pair of pliers to install and is ranked as Easy to repair by our customers. This part attaches inside of the fuel tank, and is used to clean the fuel of debris. This part should be changed regularly as part of good engine maintenance. If the engine ...Read moresounds like it is not getting enough fuel or is underperforming, remove the filter to heck for a blockage. If there is a blockage or the part is leaking, then it likely needs a replacement.

This breather, also known as a fuel tank vent, is a genuine OEM replacement part used in trimmers and edgers. It is responsible for managing the pressure and air flow inside the fuel system, by acting as a valve for the fuel tank. It allows clean air to enter the tank, while preventing dirt and debris from entering as well. Over time, the...Read more breather can crack or become clogged leading to restricted air flow, inconsistent fuel supply, fuel leakage, hard starting, and engine stalling. Locate the breather on or near the fuel tank and disconnect the hoses and fasteners attached to it. Depending on your model you may need to remove the fuel tank to complete this replacement. Place the new breather in position and reattach the hoses and fasteners. Test the new part by gently blowing into the breather to confirm that the air flow is not restricted.

This fuel cap assembly is a genuine OEM part and is designed for use with outdoor handheld power equipment. Replacing your fuel cap is as simple as removing the old one and screwing the new cap on. This fuel cap keeps the fuel within the tank during operation, preventing leaks, and ensures that no dirt or debris enter the carburetor, filt...Read moreer, fuel lines or engine. Made of plastic with a cork seal underneath, this fuel cap is sold as an individual part, and has an approximately 2-inch diameter.

This individually sold fuel gasket is designed for use with handheld lawn and garden equipment and is the seal for the gas cap. This gasket is a genuine OEM part made of a composite material and will eventually become brittle because it interacts with gas and oil, meaning it will need replacing before it becomes debris in the fuel tank. T...Read morehis gasket not only prevents debris from entering the fuel tank, but it also prevents any leaks. To replace, simply unscrew your gas cap and remove the old gasket from the cap, and then replace it with the new.

This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install. You will know you need a new one if there is a leak around the hose where this clip is used to secure it, or if the fuel line detaches.

This part is an authentic manufacturer-sourced replacement part which is specially designed for trimmers, brushcutters and blowers. This part is sold individually and made of metal. The return spring helps return the starter pawl back to the regular position after you are done starting the engine with the recoil starter.

This OEM Hex Socket Bolt is a black, 5x12mm, individually sold, metal part. A Hex Socket and Torque Wrench can be used to secure the part in place by torqueing to the manufacturer specifications. The part must be replaced when damaged (likely due to fatigue), for example if it is rounded off, has stripped threads, or is missing altogether.

This spark plug cap is a genuine OEM sourced replacement part that is commonly utilized on Shindaiwa lawn and garden equipment. It is used to connect the spark plug to the ignition wire. Please note this durable rubber part is sold individually.

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.

This replacement spring washer is a genuine OEM hardware that is commonly utilized on Shindaiwa and Echo lawn and garden equipment. It has multiple uses depending on the equipment, for correct location and application for this party please make sure to check appropriate diagrams for your equipment. Please note this durable metal spring washer is sold individually.

This manufacturer approved Spark Plug Terminal Cap is a part that is located inside the spark plug boot, and attaches to the spark plug to transfer the electrical current between the two. If broken, the spark plug will no longer get the electrical current it needs, and the part must be replaced. Installation is rated as "Easy" by customer...Read mores and requires pliers. This bronze, metal part is electrical and comes individually sold. Refer to your make, model and diagrams to ensure this is the correct part for you.