80707 ((PMA7524)(Series 4)) Snapper Lawn Tractor Accessories - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This is an authentic OEM sourced replacement part that has been sourced from the original manufacturer to be used with lawn tractors from Snapper and Simplicity. The metal bushing fits into the front wheel mounting bracket. This item is used to provide spacing between the caster and the bracket assembly. The caster busing is sold individually.

Spacer 1.0 od x.640

(c) sleeve axle

This authentic component is supplied by the original equipment manufacturer. It is specially designed for use with Snapper lawn mowers. The blade is utilized to cut grass. Unfortunately, over time it may wear out, become dull or damaged eventually requiring a replacement. Make sure to refer to the owners manual of your model for the corre...Read morect installation of this part. To replace the blade you will need a wrench in order to remove and resecure the blade bolt.

This is an original replacement part manufactured for use with riding lawnmowers. The washer is commonly used to provide a wider surface area to disperse the pressure put on the blade by the bolt that is fastened to the spindle. This washer is available as an individual replacement part, please see model diagram for associative parts.

This 3/8C hex nut, which helps secure parts in place, is gold in color, made of metal, and sold individually. This part can be used on a variety of equipment, so check with your owners manual or model number to ensure it is the nut you need. You will know it needs replacing when the threads are damaged or its ends are rounded off, causing...Read more the nut to longer be able to tighten or loosen. It is a repair our customers find easy, and just requires a wrench or socket and torque wrench to complete.

Lockwasher split 3/8

This is an authentic OEM sourced replacement part that is intended to be used with snowthrowers and lawnmowers from Murray, Snapper, and Simplicity. The metal nut is used to secure a bolt and the application of the nut can vary based on the model of equipment. It is recommended to review your model\\\'s illustrated part diagram to check the nut\\\'s compatibility and usage. This item is sold individually.

Pulley flat idle