80683 ((PL7H1404KV)(Series 4)) Snapper Lawn Mower - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

This replacement switch is a genuine OEM part, not an aftermarket equivalent. It is supplied directly from original equipment manufacturer for Murray riding lawn mowers and tractors. This switch is secured under the seat to prevent the engine from running without a driver in a seat. Mechanical switches over time tend to wear out requiring replacement. Please note, this plastic switch is sold individually.

Key-ignition indak

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This is an authentic OEM sourced replacement part that has been sourced from the original manufacturer to be used with lawn tractors from Snapper and Simplicity. The metal bushing fits into the front wheel mounting bracket. This item is used to provide spacing between the caster and the bracket assembly. The caster busing is sold individually.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

This gas tank cap is an OEM replacement part supplied by Snapper. It is compatible with over 150 models of rear engine riders. This cap provides a cover for the gas tank in the machine. It is designed to prevent the tank from leaking gasoline. This part is made of plastic and sold individually. No tools are needed to replace this part.

It is an authentic OEM sourced item which is specially produced for use with snowthrowers, generators, and rear engine riders made by Murray, Briggs & Stratton, Snapper, and Simplicity. The nut is made of metal and attaches to the starter switch. During replacement, it may require a wrench to help install this part correctly. It may becom...Read moree broken or stripped and will need to be replaced. This part is available as an individual replacement.

Spacer 1.0 od x.640

This OEM valve stem regulates air flow in and out of tires, allowing for inflation and deflation. It features an 11.5mm outer diameter, 31.75mm total length, and 22.35mm effective length. It is a metal valve with a threaded plastic cap, housed in plastic. To determine if a valve stem is broken, you can check for signs of damage or leakage...Read more. Signs of a broken valve stem include cracks, bends, or air leakage, which should be replaced to prevent tire deflation and operational issues. To remove the valve stem, fully deflate the tire first. Then, disconnect the tire from the rim to access the inner part of the rim. You may need to unthread any securing nuts if present. Use a pair of pliers to grip at the base of the valve stem and then unscrew it from the rim hole.