80662 ((ELP21703BV)(Series 3)) Snapper Lawn Mower - Overview

It is a genuine item that is supplied by the original equipment manufacturer for use in walk-behind mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. The self tapping screw attaches to the front wheel drive rear baffle. A flat head screwdriver will be necessary during the installation of this part. Over time this part may...Read more become stripped and will need to be replaced. Keep in mind this part is made of metal and is sold individually.

This is a genuine manufacturer-approved part which is made for use with Murray and Snapper riding lawn mowers and garden tractors. It is one of the special bushings that are utilized on the equipment. This part acts as a lining for components helping to provide a tight fit. Make sure to check the appropriate diagrams of your model for the...Read more correct application of this hardware. It is made of durable material and is sold individually. You may need a screwdriver and pliers to replace it.

This 5/16 washer, or toothed washer, is sold individually. It provides a tight fit between the knob and the upper handle on a range of outdoor power equipment. It attaches between the wing knob and the upper handle, and over time and through use, can become damaged and need replacing. It is gold in color and metal, and repairing it is an easy task according to our customers.

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This bolt is a genuine OEM replacement part used in a variety of lawn and garden equipment. It is 2 inches long with a head diameter of 5/16 inches, and a thread pitch of 16 threads per inch. The bolt is used to secure the upper and lower handles on your equipment. If the bolt is stripped or damaged, your handles will become loose and fal...Read morel out of alignment. You may also notice increased shaking when using your equipment. Replace the bolt promptly as the handles can eventually collapse. Each bolt sold individually.

This is an authentic replacement part manufactured for use with Snapper walk-behind lawnmowers. Lawnmower wheels can wear out from normal use and will eventually need to be replaced. This wheel is the driving wheel that is geared and connects to the transmission axle. The rear wheel assembly is sold as an individual replacement part.

Clip zone control

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is a genuine Murray and Snapper replacement part for use in lawn mowers and lawn tractors. The cap screw attaches to the idler pulley. A wrench may be needed during the replacement of this part. It is made out of metal and will need to be replaced if it strips or breaks. This item is sold individually.

This is an authentic Snapper replacement part manufactured for use with walk-behind lawnmowers. This special cable has fittings at each end to connect with the control bail and engine. The cable is used to operate the mower while the bail is pressed, then turns the engine off when released. This cable is sold as an individual replacement part.

This is a genuine Snapper replacement part. The grip is designed by the manufacturer for use in lawn tractors. This part is made of flexible rubber, and is placed on the clutch handle to provide the user with a secure and comfortable grip. No tools are required when replacing this item. Simply remove the old part and slide the new one into place. This part is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with walk-behind lawnmowers. The special double cable clamp is commonly used to secure the cables to the handle assembly. This double cable clamp is available as an individual replacement part, please see model diagram for associative parts.