80368 ((PMA7482)(Series 2)) Snapper Lawn Tractor Accessories - Overview

This danger decal in your lawn equipment is a warning sticker that reminds users to keep their hands and feet away from certain parts of your machine. Measuring approximately 4 inches in both length and width, it has the message DANGER, KEEP HANDS and FEET AWAY written on it in English. Typically, this decal is placed near the dangerous p...Read morearts of your machine, such as its blades, discharge chute, nozzle, impeller, or dashboard. If the danger decal becomes worn, torn, or difficult to read, you must replace it as soon as possible to prevent accidents from occurring. You must place it in a visible location where the person operating your machine can see it and it needs to be near the part that it is warning them about. This OEM-certified sticker is sold individually.

This genuine manufacturer-sourced replacement part is specially designed for use with Snapper riding lawn mowers. A locknut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which has multiple applications, please refer to the appropriate diagrams of your model for the correct location a...Read morend use of this part. Keep in mind this durable metal component is sold individually.

This is an authentic OEM sourced replacement part that has been sourced from the original manufacturer to be used with lawn tractors from Snapper and Simplicity. The metal bushing fits into the front wheel mounting bracket. This item is used to provide spacing between the caster and the bracket assembly. The caster busing is sold individually.

Spring clutch & brake

Spacer 1.0 od x.640

(c) sleeve axle

This authentic component is supplied by the original equipment manufacturer. It is specially designed for use with Snapper lawn mowers. The blade is utilized to cut grass. Unfortunately, over time it may wear out, become dull or damaged eventually requiring a replacement. Make sure to refer to the owners manual of your model for the corre...Read morect installation of this part. To replace the blade you will need a wrench in order to remove and resecure the blade bolt.

This is an original replacement part manufactured for use with riding lawnmowers. The washer is commonly used to provide a wider surface area to disperse the pressure put on the blade by the bolt that is fastened to the spindle. This washer is available as an individual replacement part, please see model diagram for associative parts.

This 3/8C hex nut, which helps secure parts in place, is gold in color, made of metal, and sold individually. This part can be used on a variety of equipment, so check with your owners manual or model number to ensure it is the nut you need. You will know it needs replacing when the threads are damaged or its ends are rounded off, causing...Read more the nut to longer be able to tighten or loosen. It is a repair our customers find easy, and just requires a wrench or socket and torque wrench to complete.

Lockwasher split 3/8