80200 Briggs and Stratton Engine - Overview
Models starting with 80200
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Filter- A/C Cartridge
PartSelect #: PS8987387
Manufacturer #: 491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this...
$8.98
In Stock
Lawn Mower Spark Plug
PartSelect #: PS9140427
Manufacturer #: 796112S
This is an OEM replacement part and is sold individually. Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine. It will ignite the air...
$6.40
In Stock
Grommet
PartSelect #: PS9294797
Manufacturer #: 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you...
$6.40
In Stock
Grommet
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube.
The part is made of rubber and ...
$6.40
In Stock
Diaphragm-carburetor
PartSelect #: PS8937201
Manufacturer #: 270026
This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and ...
No Longer Available
Diaphragm-carburetor
PartSelect #: PS8940668
Manufacturer #: 272538S
Genuine Manufacturer Approved replacement part, fits 3-5 gross HP Horizontal crankshaft engines (Pulsa-Jet Carburetors). This part is sold individually. Diaphragms are an essential part of an engine b...
$5.11
Special Order
Gasket-fuel Tank
PartSelect #: PS9294811
Manufacturer #: 692241
Genuine OEM replacement part used on a variety of Engines. This part provides an air tight seal for mounting the Gas Tank. This Gasket is made out of Composite Material and it is Sold Individually. Ov...
$6.40
In Stock
Spring-rewind Str
PartSelect #: PS8978476
Manufacturer #: 490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually...
No Longer Available
Key-flywheel
PartSelect #: PS8925657
Manufacturer #: 222698S
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Plier...
$6.40
In Stock
Tube-pick Up
PartSelect #: PS8966338
Manufacturer #: 391813
Genuine Manufacturer Approved replacement part used on a variety of Engines. This is a tube pick-up for 3-5HP horizontal and 5HP vertical engines with 2 and 3 quart tanks and a pulsa jet carburetor. T...
No Longer Available
Gasket-fuel Tank
PartSelect #: PS9274341
Manufacturer #: 272996
This item has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton. The special gasket is used to seal the connection between the carburetor and the fuel ta...
$6.40
In Stock
Clutch-starter
PartSelect #: PS8968281
Manufacturer #: 399671
Discover the power of optimal engine performance with the Briggs and Stratton Starter Clutch. A vital piece of your garden equipments engine, this starter clutch engages your machines flywheel while k...
$48.09
In Stock
Exact Part matches for your search term
[Viewing 3 of 3]
GAL,16 GA, 48 X 120 SHEE
This part number matches the current model number 80200
PartSelect #: PS4270021
Manufacturer #: 80200
No Longer Available
Burner Cover Latch
This part number matches the current model number 80200
PartSelect #: PS10368618
Manufacturer #: 80200
No Longer Available
Magnet, 110V / 240V
This part number matches the current model number 80200
PartSelect #: PS12034858
Manufacturer #: 80200
No Longer Available
Common Symptoms of models starting with 80200
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Could not keep an aftermarket muffler on the engine.
Once I determined what OEM muffler I needed, installation was relatively easy. I have a 1982 4hp Briggs on my Snapper tiller. There was a 90* galvanized elbow coming out of the exhaust port, with a bezel nut to lock it down. Do not remove the elbow, even though it appears that you should. If you install the muffler without the elbow the m
... Read more
uffler will parallel the the vacuum for the carburetor and can melt the rubber couplers. Use the elbow to direct the heat away from the carburetor. Use a pipe wrench to lock down the bezel nut because the weight of the muffler, especially under vibration, can work loose and fall down on the tine belt cover and melt it. The bezel nut that comes with the muffler should also be used to lock down the muffler to the threaded intake bracket that comes with the muffler, not to replace the bezel nut for the elbow.
Read less
Parts Used:
-
Richard from KERNERSVILLE, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench set
13 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no gas to carb
pulled off fuel pump cover ,cleaned surfaces. Applied gasket sealer and replaced fuel pump diaphragm.
Parts Used:
-
Dennis from MUKWONAGO, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
14 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!