780R (203096321) Ryobi Trimmer - Overview

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part ...Read moreof proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their functio...Read moren of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.

The manufacturer-certified Air Cleaner Filter is a grey foam filter used to prevent debris and dirt from entering the carburetor and engine, causing damage. Installation is rated as "Easy". This filter may become clogged and cause the engine to run rough due the restricted air flow, at which time the filter should be replaced. This filter is placed inside the air cleaner housing.

This Spark Plug is inserted into the cylinder head and is rated as "Easy" to install. The spark plug ignites the air fuel mixture inside the combustion chamber. If the part doesn't work, or is missing then the engine will not start and the spark plug must be replaced. This part should also be replaced annually as a part of proper engine maintenance. Tip: Gap to manufacturer's specs before installing.

This is a genuine OEM replacement part. it is sold individually. The Bump Head Knob Assembly is the part of the trimmer that you bump on the ground to advance the cutting line from the spool. Because of the abuse this part gets, it is advisable to order an extra one so you have on on hand. LEFT HAND THREADED

This is an original part from Craftsman for use with Trimmers and Cultivators. The carburetor mount gasket seals the space between the carburetor mount and the engine. The most common reasons for replacing the carburetor mount gasket is if there is oil leaking from the crankcase, the crankcase gasket is missing or damaged or any time the ...Read morecrankcase cover is removed. This part is sold individually. The tools that you will need to replace the carburetor mount gasket is a receptacle for draining fuel, Phillip's / Torx drivers, long-nosed pliers and a razor blade.

The Clutch Drum is a silver, metal part used to transmit power from the engine to the drive shaft. Installation is rated "Medium" difficult and will require a screwdriver, wrench set, and torx wrenches. This part attaches to the clutch assembly. If broken, the clutch will slip and you will lose drive power. If this happens, the part must be replaced.

This genuine OEM sourced item is specially designed for use with gas powered lawn and garden equipment. This rope is part of the recoil starter mechanism which allows user to pull-start the engine. One durable nylon rope is included per order, please note the plastic grip handle is sold separately.

This is an original replacement part manufactured for use with trimmers. This coated steel blade is used to get more use out of trimmers. The strong blade is used to cut tall grass and brush when clearing an area. The blade is sold individually.

This shoulder strap is an authentic manufacturer-sourced part that is designed for use in a variety of lawn and garden equipment. It is an adjustable strap made of durable synthetic material that is worn over the shoulder. The strap features one plastic slide adjuster and one metal clasp that secures it to the equipment. It is designed to...Read more reduce strain on the arms, shoulders and back when using the equipment over a long period. It also stabilizes the equipment for easier handling. Over time the strap can wear down, or the clasp and adjuster may break, leading to discomfort and strain. Detach the old strap from the equipment and clasp the new strap onto the attachment points. Adjust the length using the plastic adjuster until the strap sits comfortably on your shoulder.

This is an authentic part which is sourced from original equipment manufacturer. It is generally used on handheld trimmers/edgers. This nut is designed to secure cutting blade to the trimmer shaft. Please note you would need a properly sized wrench when installing/removing this nut. Includes one (1) nut per order.

The spring fits between the outer spool & eyelet assembly and the inner reel. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers made by Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet. A screwdriver might be necessary when replacing this part if it becomes broken or bent. This part is made out of metal and is available individually.