7536 (Type 1) Porter Cable Router - Overview

Genuine Porter Cable replacement part Includes 1 Carbon Brush with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool com...Read moreponents. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 10 Feet Long

A genuine item that is supplied directly from the original equipment manufacturer for use with Porter Cable and DeWALT power tools. It is one of the special pins designed to secure components together, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

This is a Genuine OEM sourced replacement part designed for use with a variety of Power Tools. It will have different applications based on your tool. This part is made out of Metal and it is Sold Individually. Requires a Flathead Screwdriver to tighten or loosen this Screw.

This is a genuine replacement part sourced from the original manufacturer for use with power tools. The metal screw is commonly used with several different types of power tools, and the application of the screw can vary based on the model of the power tool. This screw is available as an individual replacement part, please see model diagram for part location and usage.

Genuine OEM replacement part, this item is sold individually. The 874582 Clamp Knob is used to tighten the bases of all of the Routers shown below. It is used with part number 695526 Screw, to clamp the Router Motor in the base for the desired height of the motor.

Genuine OEM replacement part, this item is sold individually. The 685526 Screw is used to tighten the bases of all of the Routers shown below. It is used with part number 874582 Clamp Knob, to clamp the Router Motor in the base for the desired height of the motor.