7260001 Weber Grill - Overview

This is an authentic Weber replacement part manufactured for use with outdoor grills. The chrome plated handles are used with the cabinet doors. The handles will come in a set of two and include the hardware to mount the handles. The handle set is sold as an individual replacement part.

When the lower panel of a gas grill rattles or pulls away from the cabinet, worn mounting hardware may be responsible. This hardware pack provides the fasteners and washers needed to hold a compatible bottom panel securely in position. Check for loose screws, damaged threads, missing washers, panel distortion, and rust around the mounting...Read more points before ordering. A badly corroded panel or frame may also require replacement. Use the grills full model and serial details to confirm fit. Shut off and disconnect the fuel source, then wait until every surface is cool. Support the panel during installation and start all screws loosely before tightening them evenly.

This is an Original Weber replacement parts used for some of their Grills. This set contains 4 Flavorizer Bars. The purpose of bars is to direct grease and drippings away from the burner tubes, which cuts down on flare ups tremendously. An extra benefit of Flavorizer Bars is that they help add that "cooked on a grill" flavor to your food....Read more Bars rust is the combination of heat and moisture and should be replaced of they are damaged our have holes.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Weber grills. This is an authentic replacement for a missing or damaged smoker box assembly, please refer to the appropriate diagrams of your model for the correct location and application of this component. It is made of high-quality metal and is sold individually.

This left-hand side frame assembly provides structural support for the grill, ensuring stability and proper alignment of components. Made from durable materials, it is designed to withstand outdoor conditions and maintain long-term performance. The frame fits specific models and installs easily as a direct replacement for a damaged or missing part. Confirm compatibility with your grill before purchase.

This is a genuine part which is supplied by the original equipment manufacturer for use with Weber grills. The thermocouple is made of metal and attaches to the control valve. If this item becomes broken it will need to be replaced and may require a wrench during the installation. This thermocouple with electrode and wire is available as ...Read morean individual replacement part. Check the owner's manual and the diagrams for your model to ensure the correct repair procedure.

This is an authentic Weber replacement part, sourced from the original manufacturer for use with gas grills. The hardware set includes the rotisserie forks and the screws for the forks. The rotisserie hardware is sold as a set and the sets are sold individually, please note the motor, bracket, and shaft for the rotisserie are available se...Read moreparately. Recommended parts • Rotisserie Shaft, part number: 80622 • Motor For Tuck Away Rotisserie, part number: 65579 • Tuck Away Rotisserie Bracket Assembly, part number: 70885

Genuine manufacturer sourced replacement momentary light switch specially designed for lighted control knobs on Weber grills. It allows user to manually turn the accent lights on and off. This item has soft rubber push button top and two male flat spade terminals for wire connections. Please note it is sold individually. Replacing this ...Read moreswitch is easy and quick task that does not require any tools • Unplug the wires from the old switch • Unscrew the button/collar that holds module to the unit • Secure new module in place • Re-connect wires and test the unit

It is a genuine weber hardware which is supplied directly from the original equipment manufacturer for use with gas grills. These replacement screws are used to secure the burner tubes. It is a high-quality hardware which is sold in a pack of three.

This is a genuine Weber part used with the Genesis, Summit, and Spirit grills. Each pack includes two hinge bolts and two nuts; each pack has the hardware for one door. The top pin of the screws fit into pre-drilled holes in the frame of the front doors. They are held onto the doors with the provided bolts.