The fan assembly or condenser fan blade fits on the motor shaft and circulates air over the condenser. This cools the refrigerant before it enters the evaporator. If the fan assembly in your room air conditioner is not operating properly, you will need to replace it with this part. This fan assembly has 5 blades and is approximately 14-1/...Read more2 inches in diameter. It is made of white plastic. You will need to open your air conditioner, and most likely remove it from the wall/window to complete this repair. Be sure to disconnect power to the unit before you begin this repair.
This spring clamp is designed for your room air conditioner. This clamp holds the fan blade on the motor shaft so it can rotate during operation. If your fan blade is wobbling on the motor shaft, you may need to replace it. The part is made of metal and is approximately 3/4-inch in diameter. This is an OEM part sourced directly from the m...Read moreanufacturer. This spring clamp is sold individually. Before you begin this repair, make sure your air conditioner is disconnected from the power source. To complete this repair, you will likely need to remove the air conditioning unit from the wall.
This part is the replacement air filter for your room air conditioner. It is framed by white plastic and is approximately 18 inches wide and 8.5 inches long. The air filter protects your home from airborne dirt, dust, and other particles. If the air filter is damaged, it can allow these particles to pass through, and become distributed ar...Read moreound your home. A damaged air filter will need to be replaced. This part is sold individually and is an OEM part sourced directly from the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fan Broke
4 of 4 peoplefound this instruction helpful.
Joseph from BROOKLYN, NY
Difficult
1- 2 hours
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Local authorized LG repair shop told me, don't waste my time fixing it. Bench fix is $300 dollars. Purchased part, watched a video and bam. Fixed in 3-4 hours.
Was this helpful?
Thank you for voting!
Motor mount broke due to imbalance caused by mud dobber nests.
1 personfound this instruction helpful.
Travis from LOUISVILLE, IL
Easy
30 - 60 mins
Nutdriver, Screw drivers
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Was this helpful?
Thank you for voting!
fan had stripped out and was replacing.
1 of 10 peoplefound this instruction helpful.
Douglas from ENGLEWOOD, TN
Very Difficult
1- 2 hours
Pliers, Screw drivers, Socket set
very tight working situations. made a mistake with a delicate piece of the fan and broke it and that rendered the part unuseful. Since I broke it I considered it to be my fault and just threw it away. Ordered another from another company hoping that just maybe it would be more durable. It arrived in only 4 days. Yours took well over
... Read morea week to arrive. Thanks for asking for my experience.