EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

7112 - Overview

Models starting with 7112

Click on the best match to narrow your results.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fan Assembly,Axial – Part Number: 5900AR1173A
No Longer Available
Fan Assembly,Axial
★★★★★
★★★★★
(3)
Part #5900AR1173A
The fan assembly or condenser fan blade fits on the motor shaft and circulates air over the condenser. This cools the refrigerant before it enters the evaporator. If the fan assembly in your room air conditioner is not operating properly, you will need to replace it with this part. This fan assembly has 5 blades and is approximately 14-1/2 inches in diameter. It is made of white plastic. You will need to open your air conditioner, and most likely remove it from the wall/window to complete this repair. Be sure to disconnect power to the unit before you begin this repair.
Room Air Conditioner Installation Kit – Part Number: 3127A20074Y
$60.51
In Stock
Room Air Conditioner Installation Kit
★★★★★
★★★★★
(2)
Part #3127A20074Y
The installation kit contains the hardware you need to install the room air conditioner.
Damper,Compressor – Part Number: 4H00982E
$8.55
Special Order
Damper,Compressor
Part #4H00982E
Lawn Mower Hex Washer Head Screw – Part Number: 710-0599
$6.40
In Stock
Lawn Mower Hex Washer Head Screw
Part #710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.
Lawn Mower Cotter Pin – Part Number: 703312
$6.40
In Stock
Lawn Mower Cotter Pin
Part #703312
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.
Snow Blower Greased Bearing – Part Number: 2108202SM
$14.76
In Stock
Snow Blower Greased Bearing
Part #2108202SM
This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.
ROLLER – Part Number: 1668513SM
$14.95
In Stock
ROLLER
Part #1668513SM
Designed for use in Snapper and Simplicity ride-on mowers, this Roller is sourced directly from the manufacturer, is made of durable black plastic, is 4 inches long, and sold individually. The Roller helps allow the deck to move over the lawn without gouging into the ground. When the Roller has broken, you will notice the deck starts to ground out. This part will wear over time and needs to be replaced if it is damaged or fatigued. Customers rate the difficulty of this repair as Medium.
Lawn Mower Plastic Flange Bearing – Part Number: 741-0487C
$10.54
In Stock
Lawn Mower Plastic Flange Bearing
★★★★★
★★★★★
(1)
Part #741-0487C
Made of durable silver plastic, this Flange Bearing is an authentic manufacturer-source replacement part for hundreds of models of lawn and garden equipment. It is used to allow a shaft to connect while moving smoothly and freely and is sold individually. When this part malfunctions, you may notice the shaft becomes very sloppy or comes disconnected. To complete this repair, you will need a screwdriver, a socket set, and pliers. Customers rate this repair as Medium difficulty.
Clamp,Spring – Part Number: 3H02932B
$8.55
Special Order
Clamp,Spring
★★★★★
★★★★★
(1)
Part #3H02932B
This spring clamp is designed for your room air conditioner. This clamp holds the fan blade on the motor shaft so it can rotate during operation. If your fan blade is wobbling on the motor shaft, you may need to replace it. The part is made of metal and is approximately 3/4-inch in diameter. This is an OEM part sourced directly from the manufacturer. This spring clamp is sold individually. Before you begin this repair, make sure your air conditioner is disconnected from the power source. To complete this repair, you will likely need to remove the air conditioning unit from the wall.
Wsh, Bell., .34 x .872 x .06 – Part Number: 736-0242
$6.74
In Stock
Wsh, Bell., .34 x .872 x .06
Part #736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damaged, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.
Lawn Mower Brake Puck – Part Number: 917-0678
$10.54
In Stock
Lawn Mower Brake Puck
Part #917-0678
When the brakes are applied, this brake puck presses against the brake disc in your lawn equipment to help slow down or stop it. The brake puck is in the brake assembly, which might be located near the transmission or the wheels of your machine. If you notice that the machine takes longer to stop or that there is a loud scraping or grinding noise when you push down on the brake, your brake puck may have worn out. If it is not replaced, you risk losing braking power, which leads to equipment damage or accidents. Before any repairs, make sure that your machine is turned off and that the spark plug is disconnected. To dissemble the brake assembly and access the brake puck, use pliers or a wrench to remove any bolts or clips holding it in place. With a screwdriver, pry the brake puck out of your machine. Since this genuine OEM part is sold individually, determine the number of pucks your machine needs by consulting your user manual.
Nut, Cntr Lck, 3/8-16 – Part Number: 703893
$9.83
In Stock
Nut, Cntr Lck, 3/8-16
Part #703893
This centerlock nut, or lock nut, is sold individually and locks itself in place when inserted, to prevent it from backing out due to vibration. Over time, due to its strenueous job, it may become loose or break due to wear and tear, and will need to be replaced. This lock nut is made of metal and is silver in color. When it will no longer lock, you will need to complete this easy repair, which requires a wrench or socket and torque wrench. Ensure you torque the lock nut to your manufacturer specifications; this nut can have a range of different applications for a variety of equipment, so please check your model number or owners manual to be sure it is the right fit for your model.

Exact Part matches for your search term

Bottom Frame – Part Number: 7112
$7.47
Special Order
Bottom Frame
This part number matches the current model number 7112
Part #7112
Heater Assembly – Part Number: 7112
No Longer Available
Heater Assembly
This part number matches the current model number 7112
Part #7112
Decorative panel – Part Number: 7112
No Longer Available
Decorative panel
This part number matches the current model number 7112
Part #7112
GRILL COVER Q2000/Q3000 AMER – Part Number: 7112
$80.87
On Order
GRILL COVER Q2000/Q3000 AMER
This part number matches the current model number 7112
Part #7112
KIT KOBS – Part Number: 7112
$68.12
Special Order
KIT KOBS
This part number matches the current model number 7112
Part #7112
TEE, UNION-.38 FLARE – Part Number: 7112
$12.09
Special Order
TEE, UNION-.38 FLARE
This part number matches the current model number 7112
Part #7112
CAM OSC SAW – Part Number: 7112
$110.58
Special Order
CAM OSC SAW
This part number matches the current model number 7112
Part #7112

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Motor mount broke due to imbalance caused by mud dobber nests.
1 person found this instruction helpful.
  • Travis from LOUISVILLE, IL
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Was this helpful?
Thank you for voting!
Headlight stopped working
1 of 6 people found this instruction helpful.
  • Darrell from RICHMOND, VA
  • Very Easy
  • Less than 15 mins
I tried to order a light socket but you sent me a blade then cancelled my order and refunded my money after I waited for the right part.
Was this helpful?
Thank you for voting!
fan had stripped out and was replacing.
1 of 10 people found this instruction helpful.
  • Douglas from ENGLEWOOD, TN
  • Very Difficult
  • 1- 2 hours
  • Pliers, Screw drivers, Socket set
very tight working situations. made a mistake with a delicate piece of the fan and broke it and that rendered the part unuseful. Since I broke it I considered it to be my fault and just threw it away. Ordered another from another company hoping that just maybe it would be more durable. It arrived in only 4 days. Yours took well over a week to arrive. Thanks for asking for my experience.
Was this helpful?
Thank you for voting!