627104X8A Murray Snow Blower - Overview

This is an authentic OEM sourced driver belt, not an aftermarket equivalent. It is specially designed for a variety of snow throwers. This is the main drive belt for the unit that will spin the augers. Please make sure to check appropriate diagrams for correct location and application of this item. It is made from durable rubber material ...Read moreand it is sold individually. You would need a set of wrenches to complete this repair.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This Auger Drive Belt is an original part from Craftsman for use with Craftsman Snowblowers. The auger drive belt rotates the auger on the snowblower. The most common reason for replacing the drive belt is when the snowblower auger won't turn.This part is sold individually. Her is a list of tools that are needed to replace the auger drive belt are a 3/8 inch socket, 9/16 inch wrench, adjustable wrench and a clamp.

It is an authentic OEM part which is specially designed for Murray, Snapper and Simplicity snowblowers. This bearing secures and stabilizes moving parts to ensure proper rotation angle and position. Unfortunately, over time the components will wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-qualit...Read morey item is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware.

This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for replacing the friction wheel is when the snowblower's wheels don't turn.This part is sold individually. Disconnect the spark plug wire before...Read more installing this part. The tools that you will need to replace the friction wheel disc are 3/8" socket, 9/16" socket, adjustable wrench, hammer, 1/2" socket, flat-head screwdriver, and lubrication.

This quarter-inch Nylock nut, or hex nut, is silver in color and sold individually. Made of metal, its simple task is to secure and lock parts in place on a variety of different equipment. Regardless of the specific function, this nut may become damaged over time and if you notice the part it is securing becoming loose, it is time to chan...Read morege the Nylock Nut. Use a wrench to make this repair, ensuring your torque to the manufacturer specs. Most of our customers found this to be an easy repair, but difficulty can vary depending on the part you are accessing to make the repair.

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

It is a genuine component which is supplied by the original equipment manufacturer for use with Craftsman snow throwers. This special retainer outer ring is used to secure the chute assembly to the main unit, please make sure to check appropriate diagrams of your model for correct location and use of this hardware. It is a high-quality co...Read moremponent which is made of durable metal and it is sold individually. Keep in mind the hardware to secure it is sold separately.

This is a genuine manufacturer-sourced component which is specially designed for use with Murray and Simplicity snowthrowers. It provides an identical replacement for a missing or a faulty auger clutch spring that was installed on a new unit, please make sure to check the diagrams of your model for the correct location and application of ...Read morethis hardware. Keep in mind this durable part is made of high-quality metal and is sold individually.

The height adjust skid attaches to the housing assembly and helps it not to hit the ground. It is an authentic OEM sourced item which is specially produced for use with snowthrowers by Murray and Simplicity. Keep in mind this high-quality part is priced individually. A socket set may be helpful when replacing the skid and it will need to be replaced if it breaks.

This is a genuine OEM sourced part is which is specially designed for use with Murray snowthrowers. The inner retainer ring helps to secure the chute collar and the lower chute. Over time it may wear out or get damaged eventually requiring a replacement. It is made of durable plastic and is sold individually. Note, the hardware to secure ...Read moreit is sold separately. Make sure to check the appropriate diagrams for your model to ensure the exact location and the correct application. A wrench set will be needed to perform this repair.

The shear pin spacer sleeve goes between the auger and the snowblower screw. This part is priced individually. This is an authentic Craftsman replacement part that is sourced from the original manufacturer for use with snowblowers. A wrench may be needed during the replacement of this item. It is made out of metal and will need to be replaced if it breaks.