616RT (1693704) Simplicity Tiller - Overview

The Forward Belt is an individually sold, black rubber part used to drive the wheels and tines foward. It attaches around the engine foward pulley and the transmission pulley. Installation is rated as "Easy" and will require a wrench set, pocket set and pliers. If damaged or broken (likely due to fatigue) you will no longer be able to dri...Read moreve the unit, and the part must be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

The Control Engage Cable (Cable Assembly, Control Engage) is a black cable for your tiller, made of metal with a rubberized casing. It is rated as "Easy" to install, attaches on the hand control, and will require pliers and a wrench set. Refer to your make, model and diagrams to ensure this is the correct part.

The Right Side Tine Blade is an individually sold, black metal part, used to turn soil over. It attaches to the tine holder and shaft, is rated as "Easy" to install, and will require a wrench set, and socket set. If broken or damaged (due to general wear) you will notice physical damage, and should replace the part. Refer to your make, model and diagrams to check if this is the right part.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This Simplicity Decal is made of white and blue plastic, measures approximately 11 inches x 2 inches, is not part of a kit or assembly, and is sold individually. No tools are required to complete this repair. Simply clean the area and apply the decal. Customers rate this repair as Easy.

Washer-0.312(0.33idx1

Lockwasher split 3/8

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with lawn tractors, snowthrowers, utility carts, and grass baggers. The special nut is used with different types of machines and the application of the nut can vary based on the model of the equipment. This nut is available as an individual replacement part.