6148-33 (B73B) Milwaukee Angle Grinder - Overview

Genuine Milwaukee replacement part, this item is sold individually. This Flange nut is threaded on the spindle of the Milwaukee Grinders shown below. You first place the inner flange on the spindle , part number 43-34-0036. Then you place the grinding wheel of choice on the spindle. The Flange Nut is then threaded on the spindle preferably by using a spanner wrench which fits into the holes of the Flange Nut.

This is an authentic Milwaukee replacement part that has been sourced from the original manufacturer to be used with angle grinders. The metal spring fits into the gearcase and is used to provide compression for the spindle lock button. This item allows the button to be pressed and keeps it in the upright position when not pressed. The compression spring is available as an individual replacement part.

This item has been sourced from the original manufacturer to be used with angle grinders from Milwaukee. The durable plastic tube fits into the grinder's gearbox assembly. The spindle lock tube is used to secure the spring and the spindle lock shaft. The tube is sold as an individual replacement part.

This is an authentic OEM sourced replacement guard assembly. It is a high quality item designed for use with Milwaukee angle grinders. This is secured over the grinding disk to protect the user and direct the dust and trimmings away. Please note, one plastic guard assembly is included per order.

This is an authentic OEM sourced replacement component which is specially designed for use with Milwaukee angle grinders. It helps to protect the user and direct the dust and trimmings away when using the tool. Please note this high-quality guard assembly is made of durable plastic and is sold individually. Make sure to refer to the owners manual for the correct application of this component.

Genuine Milwaukee replacement part, this item is sold individually. The 43-34-0036 Disk Flange is installed first on the spindle of the grinders listed below. You can then place the grinding wheel or cutoff wheel next. Then the threaded flange nut is tightened on to the spindle to hold the grinding wheel on the spindle.

This is a genuine Milwaukee replacement part, it is sold individually. It includes the brush, brush holder and brush spring. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon ...Read morebrushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This is a genuine OEM sourced replacement screw which is specially designed for use with Milwaukee angle grinders. It is a standard hardware which has multiple applications based on the model of your reel, please refer to the appropriate diagrams for the correct location and use of this screw. This high-quality metal Torx screw is sold in...Read moredividually, over time either the threads or the head socket may wear out eventually requiring a replacement.

This cord protector is a genuine Milwaukee replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

This is a Genuine OEM Milwaukee Replacement Push Button Switch used for Angle Grinders. It includes the screws used to attach the Lead Wires. Switches are commonly replaced part in power tools. A switch handles all on/off and variable speed functions. They also have a role in electric breaking because they can momentarily reverse electric...Read moreal polarity. Since switches use mechanical internals, they tend to wear out over time and will eventually require replacement. A screw driver is needed to take the casing off of the tool to access the switch.

This is a genuine manufacturer-sourced replacement o-ring which is specially designed for use with Milwaukee angle grinders. It is utilized to provide an air-tight seal between connected pieces, make sure to check appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber material and is sold individually.