6142-30 (H40C) Milwaukee Angle Grinder - Overview

Genuine Milwaukee replacement part, this item is sold individually. This Flange nut is threaded on the spindle of the Milwaukee Grinders shown below. You first place the inner flange on the spindle , part number 43-34-0036. Then you place the grinding wheel of choice on the spindle. The Flange Nut is then threaded on the spindle preferably by using a spanner wrench which fits into the holes of the Flange Nut.

This is a genuine Milwaukee replacement part, sold individually. The Milwaukee 43-34-0935 Inner Disc Flange is placed on the spindle of the hand held grinder. Its purpose is to secure the grinding wheel to the spindle and act as a support for the grinding wheel, along with the Flange Nut (44-40-0035). This part is compatible with the Milwaukee Grinders that are shown below.

This is a genuine Milwaukee replacement part. It is sold as a Set of 2. It includes the brush, brush holder & brush spring. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon br...Read moreushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This paddle trigger assembly is supplied by the original manufacturer for use in angle grinders. It allows the user to control the speed and operation of the equipment. The paddle is 5 inches long and 1.25 inches wide. It includes a switch that activates the motor and allows the grinding wheel to spin and a safety lock to prevent accident...Read moreal starting. If the grinder does not start when you press the switch, stops unexpectedly, has inconsistent speeds, and makes unusual noises when you attempt to use it, the assembly will need to be replaced. Begin by ensuring the equipment is switched off. Remove the fasteners that hold the assembly in place and detach it from the equipment. Position the new assembly on the mounting surface and secure it in place with the appropriate fastener

This is a Genuine OEM Milwaukee Replacement Push Button Switch used for Angle Grinders. It includes the screws used to attach the Lead Wires. Switches are commonly replaced part in power tools. A switch handles all on/off and variable speed functions. They also have a role in electric breaking because they can momentarily reverse electric...Read moreal polarity. Since switches use mechanical internals, they tend to wear out over time and will eventually require replacement. A screw driver is needed to take the casing off of the tool to access the switch.

This replacement side-handle assembly is specially designed for Milwaukee angle grinders. It is an authentic OEM sourced item, not an aftermarket imitation. This side handle is secured to the grinder to provide a comfortable grip for the tool. It consists of a plastic handle and the threaded metal shaft. Replacing this item is very easy and it does not require any tools.