600RDM2 (2002-03) Jonsered Lawn Mower - Overview

The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axl...Read moree. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.

This is a genuine part that is supplied by the original manufacturer for use with Poulan lawn mowers. The blade allows you to cut grass, and weeds safely. This part is made of steel and is sold individually. The tools needed for installation are torque wrench and a socket wrench. Before beginning the repair, please remove the spark plug boot and engage the parking break.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers to install. If broken, damaged or worn, there may be a problem with the part it is securing and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

It is an authentic OEM sourced replacement part that is specially designed for use with lawn mowers. This is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct application. This screw is made high-quality metal and it is sold individually.

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.

This is an authentic manufacturer-sourced replacement component which is specially designed for use with Poulan, Husqvarna and Weed Eater walk-behind lawn mowers. It helps to secure a component on a shaft, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

A genuine item which is supplied directly from the original equipment manufacturer for use with Poulan, Husqvarna and Weed Eater lawn and garden equipment. It is one of the special screws for the skirt, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mi...Read morend this high-quality component is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with walk-behind lawnmowers. The hex head screw is used with several different models of lawnmowers and is commonly used to secure a guard to the deck assembly. This hex head screw is available as an individual replacement part, please see model diagram for associative parts.