EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

6008 - Overview

Models starting with 6008

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water Inlet Valve – Part Number: 134190200
$117.66
In Stock
Water Inlet Valve
★★★★★
★★★★★
(12)
Part #134190200
The water inlet valve has two ports for water to enter and controls the flow of water into a washing machine. Hot, cold, and warm water can easily enter the washer this way. If the water inlet valve is in any way damaged or defective, it may be slow to fill or even leak. Before beginning this replacement, make sure to unplug the washer from the power range or shut off the house circuit breaker. Remember to wear gloves for safety. Refer to the installation instructions and the diagram provided by the manufacturer for best results and accuracy.
High Temperature Lubricant – Part Number: 5303307893
No Longer Available
High Temperature Lubricant
Part #5303307893
Washer Bolt – Part Number: 137539500
$31.13
In Stock
Washer Bolt
Part #137539500
Holds plated on Trunion .312-18 x 1.625.
Leveling Leg – Part Number: 131841600
$41.19
In Stock
Leveling Leg
Part #131841600
Sold individually.
Idler Pulley C-Clip – Part Number: 3161433
$28.99
Special Order
Idler Pulley C-Clip
Part #3161433
Snow Blower Greased Bearing – Part Number: 2108202SM
$14.76
In Stock
Snow Blower Greased Bearing
Part #2108202SM
This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.
ROLLER – Part Number: 1668513SM
$14.95
In Stock
ROLLER
Part #1668513SM
Designed for use in Snapper and Simplicity ride-on mowers, this Roller is sourced directly from the manufacturer, is made of durable black plastic, is 4 inches long, and sold individually. The Roller helps allow the deck to move over the lawn without gouging into the ground. When the Roller has broken, you will notice the deck starts to ground out. This part will wear over time and needs to be replaced if it is damaged or fatigued. Customers rate the difficulty of this repair as Medium.
Upper Lip Seal – Part Number: 5303161307
$36.29
Special Order
Upper Lip Seal
Part #5303161307
This basket drive tube seal or upper lip seal is used for a top washer and is located on top of the transmission, below the agitator drive block. The tube seal functions as a protective tool to prevent water from leaking into the drive tube. The measurements for this seal are: 4 inches in length, 1 inch in height, and 0.01 lbs in weight. Remember to unplug your washer from the power source before beginning this installation, as a safety precaution. For installation instructions and accurate guidance, refer to the manual provided by the manufacturer.
Trunnion Plate – Part Number: 137107000
$39.55
In Stock
Trunnion Plate
Part #137107000
Locking Plate.
SWITCH ASSEMBLY, Ignition, 6 Pin INDAK – Part Number: 1686734SM
$45.67
In Stock
SWITCH ASSEMBLY, Ignition, 6 Pin INDAK
★★★★★
★★★★★
(1)
Part #1686734SM
Sold as a kit, including the metal body switch, a pair of keys, and the required hardware, this Ignition Switch Assembly has been sourced directly from the original manufacturer. If you are unable to start and stop your engine, you may need to replace the Ignition Switch Assembly. To complete this repair, you will need a screwdriver, a wrench set, and pliers. Customers rate this repair as Easy.
Spring-Type Washer – Part Number: 5303161306
$25.18
Special Order
Spring-Type Washer
Part #5303161306
Inlet Hose - 5 FT – Part Number: 5303912532
$72.38
Special Order
Inlet Hose - 5 FT
Part #5303912532

Exact Part matches for your search term

Nut – Part Number: 6008
No Longer Available
Nut
This part number matches the current model number 6008
Part #6008
Cilantro Stainless Steel Bottom Bowl Rack, 17-3/8-inch x 15-inch – Part Number: 6008
No Longer Available
Cilantro Stainless Steel Bottom Bowl Rack, 17-3/8-inch x 15-inch
This part number matches the current model number 6008
Part #6008
SHADE – Part Number: 6008
$8.55
Special Order
SHADE
This part number matches the current model number 6008
Part #6008

Common Symptoms of models starting with 6008

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Continued To Fill To Point Of Overflow
86 of 97 people found this instruction helpful.
  • alvaro from east hampton, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I removed the top panel held by four screws at rear of panel, pulling the panel foward and up. Then disconnected the power and water connections. Then I removed the two screws holding the flow valve to the washer rear panel,pulled the valve foward ,removed the two electric connectors, pinched the water clamp with pliers and remo ved the water connection to the valve. Then replaced with the new valve followed the above steps in reverse order, finishing up by re placing the water connections and power. Then checked fo proper replacenent and leaks before replacing top panel.
Was this helpful?
Thank you for voting!
No Cold Water
17 of 19 people found this instruction helpful.
  • Mark from Pittsburgh, PA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Checked problem on-line and discovered it was the water inlet valve. Matched the part on part select. Com. Finding the part was very easy. Part select had a grid behind the picture to help determine the size and pictures from all sides. Removing the old part, matching it, and replacement took a total of 30 minutes. I now have cl ean clothes.
Was this helpful?
Thank you for voting!
water continued to flow into machine during spin cycle
16 of 18 people found this instruction helpful.
  • Howard from Lcolnton, GA
  • Easy
  • 15 - 30 mins
  • Screw drivers
After moving machine to an area that allowed easy access to the unit, disconnected the water supply hoses from the inlet valve.
Removed the two screws that keep the back in place, removed the clips that keep the top in place, moved the top over far enough to get the valve out. Removed the screw that keeps the inlet valve in place, di sconnected the power supply to the valve, Pulled valve out in order to remove the water outlet hose. Repalced with new vale, and reversed order to install. Works just fine now.
Was this helpful?
Thank you for voting!