580328210 Craftsman Generator - Overview

This connector is sourced from the original manufacturer as a replacement part for use in generators. The connector has 6 pins/terminals which allow the joining of various electrical cables and components in the generator. Over time the connector can break or wear down, rendering it unable to secure components together. This can result in...Read more electrical hazards, overheating, instability, and loose connections. Disconnect the wires/cables connected to the old connector and remove it from the housing. Place the new connector in the housing and reconnect the wires to the appropriate terminals, following the guidelines in your equipment manual.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The hex head screw is used to secure the motor assembly to the bracket on the tank of the compressor. These screws are sold in packs of eight pieces and the packs are sold individually.

This authentic replacement part is designed for use with Craftsman equipment. Bearings are generally utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pressure, h...Read moreeat, vibration, and friction. Because of this, many bearings need to be periodically replaced. To ensure the exact location and the correct application, refer to the appropriate diagrams for your model. This high-quality crank bearing is made of durable metal and is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in Craftsman machines, such as lathes, air compressors, sprayers, and snowblowers. This is a set of five metal screws, which may be found in various locations in the machine, depending on model. Please be aware that there are diffe...Read morerent screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item.