580327121 Craftsman Generator - Overview

This is an OEM part sourced directly from the manufacturer. The brush is designed for use in generators from Briggs & Stratton. This part is a complete carbon brush assembly, which is used to supply power to the rotor. You may require a screwdriver or Allen wrench when replacing this part. This item is sold individually.

This connector is sourced from the original manufacturer as a replacement part for use in generators. The connector has 6 pins/terminals which allow the joining of various electrical cables and components in the generator. Over time the connector can break or wear down, rendering it unable to secure components together. This can result in...Read more electrical hazards, overheating, instability, and loose connections. Disconnect the wires/cables connected to the old connector and remove it from the housing. Place the new connector in the housing and reconnect the wires to the appropriate terminals, following the guidelines in your equipment manual.

8 Pack

This authentic replacement part is designed for use with Craftsman equipment. Bearings are generally utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pressure, h...Read moreeat, vibration, and friction. Because of this, many bearings need to be periodically replaced. To ensure the exact location and the correct application, refer to the appropriate diagrams for your model. This high-quality crank bearing is made of durable metal and is sold individually.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The special screw is used with several different models of compressors and the application of the screw can vary based on the model of the machine. This item is available as an individual replacement part.

This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in Craftsman machines, such as lathes, air compressors, sprayers, and snowblowers. This is a set of five metal screws, which may be found in various locations in the machine, depending on model. Please be aware that there are diffe...Read morerent screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item.