Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 56-4851-10-01

56-4851-10-01 Tappan Microwave - Overview

Get Parts and Repair Help for 56-4851-10-01

If you know the microwave repair part you need, you can browse the list of all parts on the 56-4851-10-01, or you can search by name or part description. You can also find your part by where it is located on the 56-4851-10-01 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$18.34

Tray Support Roller

The tray support roller is found inside the bottom of your microwave. This part provides support to the glass tray that sits on top. This part is white in color. The glass tray is ...

$16.85

BRACKET-SWITCH

Carousel Glass Cooking Tray

$1.13

NUT

This push-on nut can be used for a variety of household appliances. To find the exact location and proper application of this part, refer to your appliance manual. Push-on nuts, also known as push-on retainers or push-on fasteners, allow components to be easily and securely assembled to a smooth shaft. A push-on nut has radial teeth that are formed at an angle perpendicular to the target shaft. The angled teeth allow the nut to slide onto the shaft in one direction while resisting motion in the reverse direction. Remember, to ensure the nut properly holds the shaft securely in place, it is important that the shaft material is softer than the nut.

Interlock Switch

This part is used to stop the flow of electrical current when the door is opened to prevent any microwave energy escaping.

$6.54

SCREW

$3.63

Wire Rack Support

This wire rack support is designed for use in your microwave oven. If the support that contains your wire rack is damaged, you will need to replace it with this part. The rack supp...

FUSE

MOTOR-TURNTABLE

$39.20

LAMP 40 W 120 V CLE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Turntable motor was worn out - gears were slipping

  • Customer: Chad from Roanoke, VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
The job was very simple, remove the bottom plate of the microwave which is four screws and it exposes the motor. There are two screws which hold the motor in place that you access from inside the unit. Remove the two screws being carefull not to lose the gasket that is in between the motor and the bottom of the unit. Set the new motor in place being sure to ... read more

One wheel on the roller tray had a blow-out

  • Customer: Gene from Gosport, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Trashed the old roller tray and put the new one in. Fast shipping, and dependable company to do business with. Thanks read more