53807 Dynabrade Grinder - Overview

This is an original part assembled by the original manufacturer. It is compatible with various Dynabrade handheld power tools, such as grinders and finishers. Ball bearings are used to buffer between moving parts. They also serve to keep parts correctly positioned while assuring steady directional movement. Ball bearings need frequent replacement because of this high-wear role. This steel part is sold individually.

This is an original replacement part sourced directly from the manufacturer. The spacer is commonly found in power tools from Dynabrade such as grinders, finishers, and sanders. This part is made of metal, and is generally used to provide a space between the rotor assembly and the front bearing plate, allowing the rotor to spin more easily. This item is sold as an individual replacement part.

It is a genuine replacement part that is supplied by the original manufacturer for use with Dynabrade grinders. The lever provides a user with a comfortable grip to control the tool's throttle. It is an identical replacement for a damaged or a missing part that is installed on a new tool. To ensure the proper repair procedure, check the d...Read moreiagrams for your specific model. A screwdriver will be needed to take apart the housing when replacing this safety throttle lever.

This felt silencer is supplied directly from the original equipment manufacturer. The Dynabrade part is compatible with a variety of different power tools and appliances. This item is fitted between the lock ring and the air control ring, minimizing the noise. The felt silencer is sold individually. For the repair, you may need a wrench and pliers.

This is a genuine manufacturer-approved component which is designed for Dynabrade sanders and grinders. It is an identical replacement for a missing or a damaged pin that was installed on a new unit. This is one of the pins for the rear end plate. Refer to the owner's manual and the parts diagram for your model to ensure the correct repla...Read morecement procedure. Note, this high-quality pin is made of a durable metal and is sold as an individual item. A screwdriver and pliers will be needed to perform this repair.

These blades in your die grinders are located on the rotor within the motor housing. This OEM set includes four blades, each measuring approximately 1-1/2 inches by 3/8 inches. When the tool is turned on, the motor drives the rotor, causing the blades to spin rapidly and help you shape various materials. It is important to regularly check...Read more the condition of the blades and replace them if they are visibly worn out or misaligned. Additionally, pay attention to any unusual signs during operation, such as increased noise, vibration, or burning smells. To replace the blades, refer to your user manual for detailed instructions on how to disassemble the motor housing. Typically, you will need to secure the tool in a padded vise, then use an adjustable pin wrench to remove the lock ring. Proceed with disassembling the tool by removing the collet and rotor nut from the rotor shaft, followed by the cylinder, spacer, and the four blades from the rotor.

This is a genuine replacement part sourced directly from the manufacturer. The cylinder is commonly found in power tools from Dynabrade, such as die grinders, sanders, and drills. This part is made of metal, and is used to hold the rotor and rotor blade assembly. This item is sold as an individual replacement part.

This genuine Dynabrade part is OEM. It fits power tools including sanders, grinders, and various others. Bearings buffer moving parts by providing rotational support and securing position. These high wear components are replaced often for optimal performance. Sold individually.