535I Husqvarna - Overview

This 25mm blade nut is a fastener that secures the blade to the spindle or shaft of your lawn equipment. It is located at the center of the blade. Signs of a broken blade nut include looseness, stripping, cracks, or excessive wear. Failing to replace a broken blade nut can result in a loose or dislodged blade during operation. To unthread...Read more the blade nut on your machine, use a wrench or socket to loosen it. This OEM component is sold individually. To ensure you have the correct number of blade nuts for your machine, refer to the user guide as your equipment may require multiple blade nuts. Consider replacing all of the nuts in one go as they wear out at similar rates.

This manufacturer-grade bevel gear grease is used to grease transmissions, bevel gears and other gear case assemblies.

This is a genuine manufacturer-sourced replacement part which is specially designed for use with Husqvarna lawn and garden equipment. It is an identical replacement for a missing or damaged hexagon nut that was installed on a new unit. This is a standard hardware which has multiple applications, please make sure to refer to the appropriat...Read moree diagrams of your model for the correct location and application of this component. Keep in mind this high-quality nut is made of durable metal and is sold individually.

This check valve, also known as a one-way valve, is a genuine OEM part that regulates the flow of fuel/oil in the equipment engine to prevent it from flowing backwards. It is made of plastic and designed for use in a variety of lawn and garden power equipment. If the valve is jammed, worn down, or contaminated with dirt and debris, it wil...Read morel be unable to open and close properly, thus restricting the flow of fuel and compromising the engine combustion process. You will likely notice fuel leaks around the carburetor, engine stalling, hard starting, and overall lower performance from your equipment. To remove the faulty valve, carefully disconnect any hoses or fasteners connected to it. Place the new valve in position and secure it appropriately.

This is a high-quality replacement for a missing or a faulty support cup that was installed on a new unit. The component helps to provide support for the #544359101 Transport Guard which is sold separately. It is designed for use with Husqv...Read morearna and Jonsered brushcutters. Make sure to check the owners manual and the appropriate diagrams of your model for the correct application of this part. Note, this support cup is made of durable metal with rubber and is sold individually.

This OEM locking pin is found in your handheld lawn equipment to hold a part, such as a cutting head, spool, or guard, in place and keep it from coming in loose while you are using your machine. If the pin is broken, the component it is supposed to be securing will become wobbly and loose, which can cause your machine to malfunction. To r...Read moreemove a broken locking pin, you can use pliers or a small screwdriver to pull it straight out of the hole. If the pin is stuck, you may need to wiggle it back and forth gently while pulling on it. Take into consideration that this part is sold individually, so refer to your instruction manual to confirm how many of these pins your machine will need.

The handle attaches to the clamping sleeve and is made of plastic. This is a genuine Husqvarna and Jonsered replacement part for use in trimmers, saws, and brushcutters. This item is available as an individual replacement part. During replacement, it may require a wrench to help install this part correctly. Over time this part may break and will need to be replaced.

This replacement screw is a high quality hardware that is commonly utilized on Husqvarna chainsaws. It is an authentic OEM item that has multiple uses, for correct location and application of this screw please make sure to check appropriate diagrams. One durable metal hex socket head screw is included per order.

This threaded plug bolt is a precision-designed component used to securely seal lubrication ports in gear housing assemblies on outdoor power equipment. Engineered with durable, corrosion-resistant material, it helps retain essential grease while preventing dirt, moisture, and debris from entering sensitive internal components. Its thread...Read moreed design ensures a tight, vibration-resistant fit, supporting long-lasting performance and proper gear protection. Ideal for maintenance or repair, it helps preserve smooth operation and extend the life of gear-driven systems.

This is a genuine replacement part sourced directly from the manufacturer. The nut is commonly found in yard tools from Husqvarna, such as trimmers, edgers, and brushcutters. This part is a square metal nut, which is generally used to help secure the handle assembly. Please be aware that there are different nuts used in the machine. R...Read moreefer to the parts diagram to be sure of ordering the correct part. You may require a wrench when replacing this item. The nut is sold as an individual replacement part.

It is a genuine OEM sourced replacement screw which is specially designed for use with Husqvarna and Poulan chainsaws. The purpose of this component is to secure the hand guard, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually.