535-MANUAL Ridgid Pipe Tools - Overview

This is a genuine manufacturer sourced replacement part used on Ridgid pipe and bolt threading machine. It includes two (2) carbon brushes with lead wires attached and two springs. lease note brush holder is sold separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear ...Read moreitems, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a screwdriver to complete this job.

It is a genuine component which is supplied by the original equipment manufacturer for Ridgid pipe and bolt threading machines. This special cutter wheel is designed to cut steel and ductile iron. A dull or a damaged cutter wheel will increase required force, produce poor results and increase the risk of injury. On a monthly basis (or mor...Read moree often if needed) lubricate all exposed moving parts (such as carriage rails, cutter wheels, cutter feed screw, jaw inserts and pivot points) with a light lubricating oil. Wipe any excess oil from exposed surfaces. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. Note, this high-quality cutter is made of durable metal and is sold individually.

This replacement brush cap set is an authentic item that is sourced directly from original equipment manufacturer for use with Ridgid pipe and bolt threading machines. It is a high quality item that is specially designed to secure carbon brushes in the brush holder. Please note this set includes two durable plastic caps per order that will require a flat-head screwdriver to secure or remove these items.

It is an authentic manufacturer supplied replacement hardware that is specially made for use with Ridgid pipe and bolt threading machines. This pack includes six durable metal screws, the purpose of these screws is to secure the centering head. You will need a flat-head screwdriver to secure or remove this item.

This is an authentic Ridgid replacement part. The handwheel is found on pipe and bolt threading machines. This part is made of metal, and is used to move the carriage assembly forward and backward along the base. This item is sold individually.

This is a genuine Ridgid replacement part. The gerotor set is designed by the manufacturer for use in pipe and bolt threading machines. This part is made of metal, and includes both the inner and outer keys of the gerotor. It is placed in the gear housing beneath the cover plate. You will require a screwdriver when replacing this item.

This is a genuine replacement part sourced directly from the manufacturer. The O-ring is commonly found in pipe and bolt threading machines from Ridgid. This part is made of flexible rubber, and is used in the gear case to seal the connection between the cover plate and gerotor set. You may require a screwdriver when replacing this item. The O-ring is sold as an individual replacement part.

It is a genuine replacement part which is supplied by the original manufacturer for use with Ridgid equipment. These screws have multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct location and use of these components. This pack includes five high-quality hex socket head screws.

This part is an OEM sourced directly from the manufacturer for use in threading machines by Ridgid. The centering head fits next to the scroll and the back plate. During the installation of this part, a screwdriver may be needed to help in the replacement. It will need to be replaced if it becomes broken. This is available as an individual replacement part.

This authentic manufacturer-sourced bolt is made for use with Ridgid tools. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Refer to the diagrams for your model to ensure the exact location and the correct application of this screw. It is made of durable metal and is sold as an individual item. A screwdriver will be needed to secure or remove it.