53159 Hunter Ceiling Fan - Overview

This wire harness is a genuine OEM part designed for ceiling fans. The capacitor for this wire harness is red 300VAC, brown 250VAC, and purple 250VAC. The wire harness is responsible for providing power between the internal components of the fan, such as the lights and motor. The harness also organizes and insulates wires for safety and e...Read moreasy access. If your ceiling fan lights are not working, the controls are not responding, or the fan will not start, you will need to replace the wiring harness as it may be damaged or overheating. To begin the repair, remove the motor housing, blades, and fan canopy. Locate the wire harness inside the motor housing and take note of how the wires are connected to each terminal. Disconnect the faulty harness and remove it from the motor housing. Insert the new harness in the housing and connect the wires to the appropriate terminals using your notes from earlier. Reassemble the fan and switch it on to check for functionality.

This is an authentic Hunter replacement part. The globe/shade is found on ceiling fans. This part is made of glass and is used to cover the light fixtures. No tools are required when replacing this part. Simply unscrew the finial and slide the finial, finial cap, globe keeper, and globe free of the threaded rod and light pull chain. ...Read morePress the new globe and globe keeper flush against the metal plate. Thread the light pull chain through the hole in the center of the finial cap and thread the fan pull chain through the hole in the side of the cap. Finally, thread only the light pull chain through the hole in the finial and screw the finial onto the threaded rod. This item is sold individually.