5311 - Overview

This light kit assembly is a genuine Hunter replacement part. It is commonly used in ceiling fans. This item contains several parts to make up the light kit assembly. The ceiling fan would not be able to produce light without this assembly. It should be replaced if it is no longer performing. A screwdriver is needed for the replacement of this part.

This manufacturer-certified Left Hand Bolo Tine attaches to the left tine holder, and is used to dig up dirt in the area being tilled. This part is constructed of black metal, is rated as "easy" to install, and requires a wrench set. If the part appears damaged or no longer works, it should be replaced. Refer to your make, model, and diagrams to check if this part is correct.

The Right Bolo Tine attaches to the right tine holder, and is used to dig up dirt in the area being tilled. This part is approved by the original manufacturer, and is constructed of black metal. Its installation is rated as easy by our customers, and will require only a wrench set. If the part appears damaged or no longer works, it should be replaced.

This OEM Forward Idler Pulley attaches to the pivot bracket to allow the forward belt to idle when not in forward motion. If broken, the machine will no longer be able to propel forward, and the part must be replaced. This part is rated as "Easy" to install by customerss, and requires a wrench set. It is individually sold, and constructed...Read more of metal. Refer to your make, model and diagrams to ensure this is the right part.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and MTD lawn and garden equipment. This is a special component that is utilized to provide a tight seal between connected components, please make sure to refer to the appropriate diagrams of your model for the correct location an...Read mored application of this part. Keep in mind it is a high-quality part which is made of durable metal and is sold individually.

This wire harness is a genuine OEM part designed for ceiling fans. The capacitor for this wire harness is red 300VAC, brown 250VAC, and purple 250VAC. The wire harness is responsible for providing power between the internal components of the fan, such as the lights and motor. The harness also organizes and insulates wires for safety and e...Read moreasy access. If your ceiling fan lights are not working, the controls are not responding, or the fan will not start, you will need to replace the wiring harness as it may be damaged or overheating. To begin the repair, remove the motor housing, blades, and fan canopy. Locate the wire harness inside the motor housing and take note of how the wires are connected to each terminal. Disconnect the faulty harness and remove it from the motor housing. Insert the new harness in the housing and connect the wires to the appropriate terminals using your notes from earlier. Reassemble the fan and switch it on to check for functionality.

This is an authentic Troy-Bilt replacement part that has been sourced from the original manufacturer to be used with tillers. The knob attaches to the end of the depth regulator bar and is used to provide a grip to the bar when changing the depth of cut. This item is available as an individual replacement part.

An authentic item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt tillers. It is a special gasket that helps to provide a tight seal for the front bearing cap, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality part is made of durable composite material and is sold individually.