5310009 Weber Grill - Overview

When the lower panel of a gas grill rattles or pulls away from the cabinet, worn mounting hardware may be responsible. This hardware pack provides the fasteners and washers needed to hold a compatible bottom panel securely in position. Check for loose screws, damaged threads, missing washers, panel distortion, and rust around the mounting...Read more points before ordering. A badly corroded panel or frame may also require replacement. Use the grills full model and serial details to confirm fit. Shut off and disconnect the fuel source, then wait until every surface is cool. Support the panel during installation and start all screws loosely before tightening them evenly.

This is a genuine manufacturer sourced replacement thermometer designed for use with Weber grills. It can be used to measure temperature inside the grill and the temperature of the food. Mounting tab fits into slot in the bezel to secure the position of the gauge. This part is made out metal and it is sold individually. Please note the, bezel is sold separately. Dial reads 150 - 700 degrees F.

This is an authentic Weber replacement part that has been sourced from the original manufacturer to be used with natural gas grills. The brass coupler is used to connect the fuel hose to the natural gas supply. This quick disconnect is sold as an individual replacement part, tools may not be needed to install this item.

This is a Genuine Manufacturer Sourced replacement part used on a variety of Weber Grills. This is a Metal (Aluminum) assembly used to prevent drippings and food particles from marring your deck or patio.

This genuine OEM repair kit is used with Weber grills. This is a four-part assembly that includes two posts and two retaining clips. The posts are designed to hold the lid to the body of the grill while still allowing it to move freely like a hinge.

This is an authentic OEM sourced item, it is not an aftermarket imitation. This high quality bezel is specially designed for Weber grills. This is the bezel for lid thermometer which is also called a temperature gauge. Please note, one metal item is included per order. No tool would be needed to replace this bezel.

This is an authentic OEM sourced replacement part designed for Weber gas grills. This part has a plastic body and it is sold individually. Ignition module produces the spark to ignite the burner. It has two (2) flat connectors. Requires a AA battery (not included). Replacing this Electronic Ignition Module is easy and does not require an...Read morey additional tools • Unplug the wires from the old ignition module • Unscrew the button that holds it to the unit • Place a new module in place • Install a AA battery and secure the module with the button • Connect the wires